Tools For Evo 50??
 

Hey guys,
I'm getting ready to run to the hobby store to pick up the last few things I need to finish setting up my new Evo 50. I'm going to get some ball link plyers, and allen head drivers. What sizes do I need in the allen head drivers to cover pretty much everything on the heli? Anything else I should pick up? Thanks in advance for your help!!

Todd

RE: Tools For Evo 50??
 

If this is your first build, a blade balancer, pitch gauge, and optical tach would all be nice tools to have. I'm not sure if you'll have a lot of use for nut drivers, but they are nice to have. If there is a lot of metal to metal fasteners I would pick up some locktite and don't forget some triflow or other lubricant. For allen drivers 1.5, 2, 2.5, and 3 mm do about anything on all of my helis. If you need one a glow plug extension would be a good idea too. I know I didn't cover everything but this should get you going.

RE: Tools For Evo 50??
 

Not that you need everything in the review but have you read this?

http://www.rcuniverse.com/magazine/a...article_id=890