Hitec Telemetry, Navi interface
10-26-2013, 07:23 AM
#1
Thread Starter
Join Date: Sep 2004
Location: Calgary,
AB, CANADA
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Hitec Telemetry, Navi interface
Hi,
I have the advanced sensor station with the following sensors attached;
I get readings from the following on the sensor station display and 2D display
Is the NAVI defective, or is something else possibly wrong?
I am testing the system in an electric Formula One pylon racer (110 MPH) and once proven plan to purchase several systems to operate in Quarter 40 (200MPH) nitro pylon racers to evaluate, monitor and record flying style, plane type, engine and propellor performance.
Regards
I have the advanced sensor station with the following sensors attached;
- GPS; position, altitude and ground speed
- 2-temperature sensors
- Air speed
…….however…...
I also have the Navi and most recent software installed on a laptop running older windows OS.I get readings from the following on the sensor station display and 2D display
- GPS; position, altitude and ground speed
- 2-temperature sensors
Is the NAVI defective, or is something else possibly wrong?
I am testing the system in an electric Formula One pylon racer (110 MPH) and once proven plan to purchase several systems to operate in Quarter 40 (200MPH) nitro pylon racers to evaluate, monitor and record flying style, plane type, engine and propellor performance.
Regards
