servo lead lengths, etc.
12-17-2003, 11:03 PM
#1
Member
Thread Starter
Join Date: Oct 2003
Location: topeka,
KS
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
servo lead lengths, etc.
mike (or whomever knows this): i'm getting ready to order my airborne electronics for my winter project, & need to know how long the leads are on the hs-475 servos, so i'll know whether to order extensions or not. also, what is the length of the leads (from where they split, outward) of the hitec y-connector; this, too, will be a factor in determining need for extensions. other question: using the flash 5X, & i believe, switch 3 to operate it, i'm planning on installing a servo-operated kill switch for gas engine. does this need to be a certain kind of servo, or will just a garden-variety 425 or so do it? thanks!! -daniel [email protected]
12-23-2003, 03:13 PM
#2
Senior Member
My Feedback: (1)
Join Date: Jan 2002
Location: Poway, CA
Posts: 3,531
Likes: 0
Received 0 Likes
on
0 Posts
RE: servo lead lengths, etc.
Standard size servo lead lenght is 12". The Y-harness will vary with the lenght. A standard servo is fine for a kill switch.
Mike.
Mike.
