Model Memory Corruption - Eclipse 7
#1
Junior Member
Thread Starter
Join Date: Nov 2002
Location: Bloomington, IN
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Model Memory Corruption - Eclipse 7
I have an Eclipse 7 radio with Spectra module that has operated for 2 years with no issues. Recently, some of the model memory settings changed unexpectedly between power cycle events. The items that changed were as follows:
1.) Servo reverse programming for the rudder and elevator went to the opposite state.
2.) Model memory label changed from "UCD3D" to "UCD3P".
It was possible to reset the modified data, but this type of data corruption is obviously quite concerning. Is there something that can be done to resolve this in the field or should this transmitter be sent in for service ?
Thanks,
Bryce
1.) Servo reverse programming for the rudder and elevator went to the opposite state.
2.) Model memory label changed from "UCD3D" to "UCD3P".
It was possible to reset the modified data, but this type of data corruption is obviously quite concerning. Is there something that can be done to resolve this in the field or should this transmitter be sent in for service ?
Thanks,
Bryce