problem with laser and reciever
04-22-2005, 07:18 PM
#1
Junior Member
Thread Starter
My Feedback: (4)
Join Date: Mar 2005
Location: Ephraim,
UT
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
problem with laser and reciever
ok i just got into rc flight and i wanted to buy a radio. i bought a radio from a seller on rcunverse marketplace
it came with a 8 channel rx and laser 4 tx
i ended up losing the plane so i decided to buy a new reciever
i fly park flyers so i went for the feather reciever.
i checked my radio system and it turns out that it runs off 75mhz so when i put the crystals in both
rx and tx nothing happened.
is there anything i can do to make this work or would you suggest a different reciever
what should i do
thanks
it came with a 8 channel rx and laser 4 tx
i ended up losing the plane so i decided to buy a new reciever
i fly park flyers so i went for the feather reciever.
i checked my radio system and it turns out that it runs off 75mhz so when i put the crystals in both
rx and tx nothing happened.
is there anything i can do to make this work or would you suggest a different reciever
what should i do
thanks
04-25-2005, 02:14 PM
#2
Senior Member
Join Date: May 2004
Location: Poway,
CA
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
RE: problem with laser and reciever
You'll need to have the laser converted to 72Mhz in order to fly a plane. Follow the instructions in the sticky at the top of this forum to send it in.
