ECLIPSE 7

Reply Subscribe

Thread Tools

Search this Thread

04-20-2008, 05:02 PM

Command Central

Member

Thread Starter

My Feedback: (25)

Join Date: May 2003

Location: Peru, NY

Posts: 51

Likes: 0

Received 0 Likes on 0 Posts

ECLIPSE 7

I just bought a used Eclipse 7 in VG condition. I find that throttle trim does not move the servo arm. EPA for high and low end and throttle cut works fine.

What am I doing wrong?

Thanks,

Roy

Reply Like

04-20-2008, 06:45 PM

A.T.

Senior Member

Join Date: Jul 2002

Location: Auckland, NEW ZEALAND

Posts: 2,581

Likes: 0

Received 1 Like on 1 Post

RE: ECLIPSE 7

Quote:

ORIGINAL: Command Central I just bought a used Eclipse 7 in VG condition. I find that throttle trim does not move the servo arm. EPA for high and low end and throttle cut works fine.
What am I doing wrong? Thanks, Roy

Does the trim work with throttle lever in lowest position? Similar to all other known computer transmitters, the throttle trim works betwen 0 - 50% of travel only. Please refer page 8 of the manual "Note that the CH3 trim only moves downward, so if you need more engine RPM, set up idle with the trim at -25% so you can increase it if needed."
Download .pdf Manual and addendum from
Eclipse features
Regards
Alan T.
Alan's Hobby, Model & RC FAQ Web Links