Aurora 9 throtle cut issu
hi
i noticed a problem when trying to set the throtle cut i set the switch to H and set to ACT now the throtle arm is not move at all when trying to move it but the throtle cut working i switched to a different letter (switch) but it act the same what do i do wrong thank you ilan |
Originally Posted by yak-54
(Post 11716133)
hi
i noticed a problem when trying to set the throtle cut i set the switch to H and set to ACT now the throtle arm is not move at all when trying to move it but the throtle cut working i switched to a different letter (switch) but it act the same what do i do wrong thank you ilan . Aurora 9 - Throttle Lock (Hold) & Transmit Yes-No Features & Use. ... How to use Icon and/or Switch method which operates when in transmit mode only. . Aurora 9 - Throttle Cut & Idle Down Set-Up.. Throttle Cut Programming - Step by Step. . Aurora 9 - Throttle Curve - Throttle Expo & P-Mix Set-Up. [NB: Hitec TX use Minus (-) Expo wherever JR/Spektrum use Plus (+) Expo] ex Hitec USA Support Forum Sticky: Aurora 9, AFHSS 2.4Ghz Module, Transceivers_Receivers & Telemetry - FAQ, Setups & Tips {Individual Links often updated} Alan T. Alan's Hobby, Model & RC FAQ Web Links |
thank to A.T
i will try it when return from work ilan :o |
hi A.T
it doesn't work the throtle lock is INH nothing i do make the servo move except the the small movement to cut engine ilan :mad: |
Make sure you activate the "adjust to trim" function in the menu which then allows you to set it with the throttle trim when the switch activates it.
Mike. |
hi mike
i will give it a try and let you know ilan |
Hi to my friends
yesterday i found the problem why the throttle cut didn't work properly the reason is that i didn't choose the on/off setting after selecting the switch now it is working fine many thanks ilan |
All times are GMT -8. The time now is 06:20 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.