RCU Forums - Rewiring servo extensions

RCU Forums (https://www.rcuniverse.com/forum/)

- Hitec/MultiPlex Radios- Ask Hitec Customer Service (https://www.rcuniverse.com/forum/hitec-multiplex-radios-ask-hitec-customer-service-53/)

- - Rewiring servo extensions (https://www.rcuniverse.com/forum/hitec-multiplex-radios-ask-hitec-customer-service-53/1876178-rewiring-servo-extensions.html)

k5mog

06-05-2004 08:27 PM

Rewiring servo extensions

Hello Mike
I wondering if Hitec servos wired to work with Jr equipment, can have the pins inserted into a futaba housing and be used with futaba recievers.
Thanks Ralph

mglavin

06-06-2004 07:58 AM

RE: Rewiring servo extensions

Yes, this should be a gimme. I use Hitec and JR servos and extensions with my Futaba equipment.

MTT	06-06-2004 02:06 PM

RE: Rewiring servo extensions

Aservo is a servo is a servo is a servo....
It has no means of knowing to what brand RX it is hooked up, and it doesn't care , either!
All you need to watch on the rewiring, is the color code of the wires, red/black for pos/neg is equal on all brands, but the signal wire can be white, yellow, or orange.

All times are GMT -8. The time now is 02:21 PM.