RCU Forums - Programmer & Microseconds

RCU Forums (https://www.rcuniverse.com/forum/)

- Hitec/MultiPlex Radios- Ask Hitec Customer Service (https://www.rcuniverse.com/forum/hitec-multiplex-radios-ask-hitec-customer-service-53/)

- - Programmer & Microseconds (https://www.rcuniverse.com/forum/hitec-multiplex-radios-ask-hitec-customer-service-53/214149-programmer-microseconds.html)

bob_nj

07-31-2002 01:46 PM

Programmer & Microseconds

Just received my Programmer yesterday. Did some servo and Tx testing on the bench last night. Neat tool! My question is this, it's kind of common knowledge that the servos like to work in a frame rate of around 2100us. My Futabab 9ZAPS was around 900 to 2100. Seemed normal enough. JR 10X read from around 1100 to 1900. I'm a bit confused_bob

MikeMayberry

07-31-2002 04:32 PM

Programmer & Microseconds

The maximum travel will be when the the EPA and D/R's are set to max.

Mike.

bob_nj

07-31-2002 06:09 PM

So, is it possible for the 9Z to over extend the servo so to speak if I extend the travel limits on it?

All times are GMT -8. The time now is 08:31 PM.