Are these servos adequate?
Hi Mike,
I 'm figuring out what i want to do with my DP Ultimate that is going to have a YS 140L in it. I'm wondering about the HS 225 MG's for the elevator halves as well as the 4 aileron surfaces. Are they strong enough to stand up to the job on a 6 volt system? How about those new digital ones based on the 225 body??(btw What's the offical number for them?) Another question is do you think 2 HS 81's could hold up for use on the elevator of a Pizazz or should i use the 85's??? Both of these planes are 3D'd Thanks for your advice (and anyone else who wants to chime in with their experience) HSH |
Are these servos adequate?
I would use Hitec 625s or 645s for your application the 225s are strong but the 625s are about the same price from National Hobbies around 37 bucks Why take a chance?? I havent had any experience with the new digitals you mentioned only the 5625s and have had good luck with those on 33% laser Hope this helps
|
Are these servos adequate?
I was thinking of the 225's in order to save some weight.
HSH |
Are these servos adequate?
One 5245MG per aileron should be fine. I would not recommend the 81's for the Pizazz, the 85MG's would be a safer choice.
Mike. |
All times are GMT -8. The time now is 11:52 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.