Dave33

My Feedback: (2)

WOT into a curb. Took the ole Savage out last weekend for a few laps. It was about 50 yards away and I mis-judged how close it was to the curb. I was making a big sweeping turn at WOT and WHACK!
Damage list
3 servos
1 Dogbone
Front diff housing
both TVP's
1 pro line wheel
radio box
1 shock
shock tower
2 hinge pins
1 lower arm
1 turnbuckle

Thank God for ebay

Nitronutt

My Feedback: (2)

Thanks for the carnage...and the advice!!!

Stablock

I'll give ya $50 for it.

brokenstuff

i was gonna say i bent mine worse but after the 3rd pic


naw u bent urs WAY worse [X(]

speedygonzales

what is the big box thing behind the bumper?

ratpower396

yeah what is that box????

03 DSG Snake

The box is in front of the radio tray it looks like his receiver pack?

Rep99099

LMAO! I hit a curb about 3/4 throttle, all the damage I had was 2 bent bumper screws.

Dave33

My Feedback: (2)

It's my NOS bottle. LOL. No it's my hump pack. I never have to open the radio box to change the battery. Just 2 clips, pop it open and swap the battery. It works great. It's the only thing that didn't break. Here's a link for the parts and info on the mod. The only thing I added was a zip tie to the bottom. I wrapped the tie around the front suspension.
http://www.savage-central.com/ftopic24672.html+mod

pairofscramblers

Can you buy that external battery pack kit somewhere? That is pretty slick, the stock battery box is a pain.

CR500rider

ok, so how do you keep that thing so clean? it looks brand new

Dave33

My Feedback: (2)

It's Winter here with 3 feet of snow everywhere. We're limited to just parking lots for now.

RabidRacer

i like that rx batt box. ill have to get it with a savage

svgrules1

3 feet of snow i have that in my back yard and i made a track, im just waiting for one way starter bearing

dmzamora

My hump pack was sitting right in the place of the original battery pack. I changed the switch harness to a Futaba with charging jack, ran it out next to the switch, and voilá

NEVER had to open the radio box to charge the batt

[]s,
Daniel

JEXTEL

My Feedback: (1)

you forgot to add a chassis looks from that picture you bent it

brokenstuff

this mod was the inspiration for my batt box mod with rc solutions roll cage

i shaved the rod inbetween the two sides to fit in a xtm radio box drilled holes in the radio box stuck the battery in and ran the wire

Om3ga

My Feedback: (7)

[:-][:-]Your joking right stablock? lol



Ahh the horror.. now you have a good excuse to buy more hop ups parts