sh one way help
05-18-2008, 06:57 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Ajax,
ON, CANADA
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
sh one way help
hey guys
need some help here
i have an sh 28 and need a new one way for it. Can you guys let me know i can or can't use the mach 26 oneway? or what the deal is?
thanks
need some help here
i have an sh 28 and need a new one way for it. Can you guys let me know i can or can't use the mach 26 oneway? or what the deal is?
thanks
05-18-2008, 09:32 PM
#2
Senior Member
RE: sh one way help
I think this [link=http://images.google.com/imgres?imgurl=http://graphics.hobbypeople.net/gallery/148189.jpg&imgrefurl=http://www.hobbypeople.net/gallery/148189.asp&h=304&w=305&sz=11&hl=en&start=3&sig2=rwBsTbTz0pOxeklfGaRZlQ&um=1&tbnid=SVIEm7NblahqOM:&tbnh=116&tbnw=116&ei=4uQwSJpSkNB546uN6gE&prev=/images%3Fq%3DTS005A%26um%3D1%26hl%3Den%26rls%3DGGI H,GGIH:2006-50,GGIH:en%26sa%3DN]one bearing [/link] is the same one. Does yours look anything like this?
05-18-2008, 10:13 PM
#4
Senior Member
Join Date: Jul 2007
Location: north bay,
ON, CANADA
Posts: 1,275
Likes: 0
Received 3 Likes
on
3 Posts
RE: sh one way help
match it up.
i ordered one for my lrp with 4 slots and got the one with 2 slots didn't fit the crank pin and had to press the bearings out and swap them.
i ordered one for my lrp with 4 slots and got the one with 2 slots didn't fit the crank pin and had to press the bearings out and swap them.
05-19-2008, 11:25 AM
#5
Senior Member
Thread Starter
Join Date: Mar 2004
Location: Ajax,
ON, CANADA
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
RE: sh one way help
That is the problem i have.
I also have a mach 26 engine and i have compared the one way on the mach to the one way on the sh. One of them has a longer plastic collar on it and the back plates also don't match up. These parts are not on any engine at the momment and the sh is in the savage, which is why i am having trouble sorting this out. I may just grab an axial 28 from amain for 109 dollars, about half the price of everything i need and no issues to deal with.
I also have a mach 26 engine and i have compared the one way on the mach to the one way on the sh. One of them has a longer plastic collar on it and the back plates also don't match up. These parts are not on any engine at the momment and the sh is in the savage, which is why i am having trouble sorting this out. I may just grab an axial 28 from amain for 109 dollars, about half the price of everything i need and no issues to deal with.
05-20-2008, 02:24 PM
#6
Senior Member
