ShoestringRacer

The General has a new LRP .30 under the hood. 17/47 gearing with the stock plastic pipe and stock clutch.


http://www.youtube.com/watch?v=KC3rxSYwvNM

BudBud

What pipe are you running? Is that an exhaust deflector I saw on the exhaust? It certainly has that SH engine sound. Thanks for posting it up! Glen

Editing... duhh... If I would only read I would see the stock plastic pipe.... [&:]

cummins driver

My Feedback: (31)

rcnitrohead

Nice little engine there that LRP is. Has torque like a mother, and sounds great. Keeps up well with mine too, easy starting and doesn't stall. I just thought the idle needed to be picked up on the engine a tiny bit cause braking kills it.

Tom.

rclugnut10

My Feedback: (1)

sounds very good i'd love to see that with some aluminum shoes and a better pipe, i bet that thing would really rip... tho it coulda been the pipe, but you did sounda little rich on the bottom in the beggining to me at least....

the lug

rcnitrohead

Keep in mind that he is still breaking it in... That was the 7-9th tank roughly and he was running 3 mixed fuels at once with some added Klotz oil on the stock pipe- so I think that engine has tons of potential...

BudBud

I have more fuel than that through mine, but I do not think mine will run that hard yet without locking the piston in the sleeve. I am anxious to try it though!

rcnitrohead

Another LRP .30 vid from later that day tuned up better:

http://www.youtube.com/watch?v=_Fdcf...e=channel_page

madmaxx1

guy's please can we try and get all this info in one spot to make thing's easy for us? please

http://www.rcuniverse.com/forum/m_8722968/tm.htm

ArancioC5

heee haww

rcnitrohead

Nope, that was his truck.. He took off the wheelie bar after it broke and I let him try out my tires.