My e savage build
Hy guys, just some pics of my finished e savage build.
here are some pics http://i157.photobucket.com/albums/t...9110009-02.jpg http://i157.photobucket.com/albums/t...9110009-01.jpg http://i157.photobucket.com/albums/t...9110009-00.jpg http://i157.photobucket.com/albums/t...9110007-01.jpg http://i157.photobucket.com/albums/t...9110007-00.jpg http://i157.photobucket.com/albums/t...8111704-00.jpg http://i157.photobucket.com/albums/t...8111703-00.jpg Its a full Gcm race spec truck, upgraded diffs, upgraded drive shafts, 2030 kv 6 pole motor and a MMp 4s coming soon aswell. Tires and rims are rulux half ups on badlands. |
RE: My e savage build
1 Attachment(s)
not bad looks cool id raise the body a bit
|
RE: My e savage build
Looks awesome. Those badlands are just sick looking! Good job!
|
RE: My e savage build
body cannot be raised unfortunately, it sits on top of the shock towers and is held in by bold. Has worked amazingly so fat, and most of my bodies dont require to sit high. The front shocks have also been swapped out to black stiffer springs, so it dosent sag as much. Can t wait to run this beast!
And yes, those badlands are amazing! they cut the grass for me hehe... |
RE: My e savage build
You guys know of a wing that'll mount to the shock towers?
|
RE: My e savage build
Hey ESAVAENOOBIE what shocks are you using?? They look sweet. Was this a Nitro you converted?
RB |
RE: My e savage build
they are HPI threaded aluminum ones, ano'd red, with Black stiff springs off a nitro savage. And nope its an electric "e zilla" from a long time ago, with upgraded Blitz diffs and such. The shocks in the first pictures are ofna lx-1's.
some pictures from yesturdays run http://i157.photobucket.com/albums/t...5111600-01.jpg http://i157.photobucket.com/albums/t...5111600-00.jpg http://i157.photobucket.com/albums/t...0111715-00.jpg and a small video, the battries (2x 3300nimh:(..) dont have enough punch going lipo in the comming weeks so its all gud! http://s157.photobucket.com/albums/t...11555-01-1.mp4 |
RE: My e savage build
Thinking about running 3s in this, or should i run 4s?
|
RE: My e savage build
That's a cool truck. looks like a lot of fun!
Definitely run 4s. Less current, so less electrical issues ;) Is it just ThunderbirdJunkie, or do your springs look almost fully compressed in the pics where it's sitting? Do you get full range of motion or do the coils stack? |
RE: My e savage build
Nope, no sagage on my springs, just my 2.0mp phone adding blurness to them. No binding or any other limitations on them. i will be rebuilding them soon,they have to much rebound...
|
RE: My e savage build
FYI the Savage Flux battery boxes bolt to the E-Savage with an extended chassis with little effort.
I only run 2-3s in the e-savage max hence the single box. This is mine... FLM extended chassis, Kershaw Designs e-savage shocks (I think they are from CEN MT), Novak HV-Maxx with 6.5 motor and a few more goods. It has been a good truck. Not the best, but its fine under 2-3S power. I rarely break anything on it. http://www.intergate.com/~rpurcell/r..._flux_box2.JPG http://www.intergate.com/~rpurcell/r..._flux_box1.JPG |
RE: My e savage build
Nice looking truck man!, The rims are revolvers, what are the tires? How you liking those shocks? id add a second tray for astectic looks.. (im picky like that). Like the body too. Im running an inboard lipo tray so i dont need any trays..
|
RE: My e savage build
I jsut got my sway bars in today!
|
RE: My e savage build
Nice truck man!
ORIGINAL: esavagenoobie Nice looking truck man!, <span style="color: rgb(255, 0, 0);">The rims are revolvers, what are the tires?</span> How you liking those shocks? id add a second tray for astectic looks.. (im picky like that). Like the body too. Im running an inboard lipo tray so i dont need any trays.. Thanks |
RE: My e savage build
The tires are Losi Zombie Maxx for the TMaxx. Unfortunately, it looks like they were discontinued.
|
RE: My e savage build
looks good, whats your top speed?
|
RE: My e savage build
ORIGINAL: Dale Gribble The tires are Losi Zombie Maxx for the TMaxx. Unfortunately, it looks like they were discontinued. Thanks |
RE: My e savage build
yea they should their 3.2's.. id opt for a 17+mm wheel hex..
|
RE: My e savage build
Yea but I would be putting it in my Mini MGT which takes 14mm stock.
|
RE: My e savage build
Id highly suggest switching to 17mm adapters.... i run the hpi ones on my truck..
they essentially look like [link=http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNWS2&P=ML]this[/link] but are aluminum and from hpi... |
RE: My e savage build
I've seen the hpi adaptors but I dont see why I should change the hex size and pay $20 more if I can buy a 14mm rim, is it that big of a difference?
|
RE: My e savage build
If you like rounding out the hexes in wheels then stick with the 14mm :)
|
RE: My e savage build
Personnaly, id rather not destroy 60 dollar rims... but if you havent had a problem.... Brushless is a lot harder on the hexes then nitro..
|
RE: My e savage build
On an e-savage (not to be confused with Flux), stripping 14mm hexes is the least of our worries if we have enough power to strip hexes. Anything above 3s on a decent brushless setup will wreck these trucks.
|
RE: My e savage build
IMm running blitz gears in mine..
|
All times are GMT -8. The time now is 09:10 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.