|
Dynamite Big Red .28 in a XL?
Searched youtube got nothing, anyone have the new dynamite big red .28 in their XL? Wanted to see how how this thing pushes the XL around.
Its a newer engine, I've seen run in an LSTand it has some torque. Post vids if you have em Thanks |
RE: Dynamite Big Red .28 in a XL?
i'm looking at the same engine for my X SS cuz my k4.6 is sucking air like a vacum, and i've seen it in a revo and it was pretty sick, tons of power down low especail and easy to tune, with a spin/pull combo
here's the vid http://www.youtube.com/watch?v=Dscu3-a3DX0 i was thinking a 053 pipe with round header and i'd just snag some flux boncers off ebay, the lug |
RE: Dynamite Big Red .28 in a XL?
Well Ican tell you the .28 has plenty of power to put an LST on its back at 3/4 throttle. I dont know what gearing my buddie is running but his truck is boderline uncontrollable, Icant even imagine this thing in a revo.
Im just wondering if its as powerful as an LRP30.....the big red is about 50 bucks less. |
RE: Dynamite Big Red .28 in a XL?
probally not but for $65 less (if you check amain) its hard to beat,
the lug |
RE: Dynamite Big Red .28 in a XL?
eagle76, I am new to the board (I will introduce myself later), but I have a Savage XL with a big red. This thing is ridiculous. 1/4 throttle wheelies on demand and GPS 49mph. I haven't found anything that will run with it yet. My friend has a picco .27 and I walk away from him. If you have any other questions let me know since I love talking about my new toy.
talk to you guys soon! Mike |
RE: Dynamite Big Red .28 in a XL?
The Big Red .28 has insane torque, as seen in the video... on pavement it is uncontrollable... I know that because that Revo is mine ;)
I am sure the LRP is a very good engine, but I don't see where the extra $55 go for. I don't see why you would need more power... In the video I removed the shim, put a hot plug, and run on a 5% nitro fuel. I can't imagine what it would be like with a 30% |
RE: Dynamite Big Red .28 in a XL?
savgemike,do you have any videos of your Savage running?
|
RE: Dynamite Big Red .28 in a XL?
I have a LRP30 and would want to get the Big Red because the heat sink just looks so cool!!:D:D:D Saw it at LHS and I was surprised that the motor was only $149.99
This and the LRP28 will definitely be tough choice when my F4.6 craps out in my X. |
RE: Dynamite Big Red .28 in a XL?
mbxrb75, I don't have a camcorder. I put all my money into this truck! Mike</p> |
RE: Dynamite Big Red .28 in a XL?
Is the Big Red a 3 port or 6 port SH 28?
This is relevant to ThunderbirdJunkie's interest. |
RE: Dynamite Big Red .28 in a XL?
ORIGINAL: davidaxper The Big Red .28 has insane torque, as seen in the video... on pavement it is uncontrollable... I know that because that Revo is mine ;) I am sure the LRP is a very good engine, but I don't see where the extra $55 go for. I don't see why you would need more power... In the video I removed the shim, put a hot plug, and run on a 5% nitro fuel. I can't imagine what it would be like with a 30% |
RE: Dynamite Big Red .28 in a XL?
ORIGINAL: ThunderbirdJunkie Is the Big Red a 3 port or 6 port SH 28? This is relevant to ThunderbirdJunkie's interest. |
RE: Dynamite Big Red .28 in a XL?
I'm surprised to hear so much positive feedback over the Big Red - cuz I would've thought it was just a rebadged Mach 28. Apparently it's not though..
It's not a rebadged LRP 28 Spec 3 either.. Can anybody compare this to a Spec 3/Losi 454?? |
RE: Dynamite Big Red .28 in a XL?
HS, if it's a 3 port SH 28, it's a terd with no real top end.
Same thing as what ThunderbirdJunkie already has for PCS |
RE: Dynamite Big Red .28 in a XL?
I always heard the 3-port SH's were good - good torquey bash engines...
If it's a 6-port, that sounds like a re-badged LRP Spec 2, with some of the Dynamite XLP touches or whatever?.. |
RE: Dynamite Big Red .28 in a XL?
If it were 6 port, ThunderbirdJunkie would have just ordered it.
The 3 port has NO top end and will get raept by a Mach 427 Correction, Horizon sez it is 6 port. Time to buy. BBL guise:) |
RE: Dynamite Big Red .28 in a XL?
If its the 6 port it will scream on topend i had the xtm457 6 port,
basically the same engine internally and it was excellent allround, i also had the sh28 3 port in a 2speed monster pirate and it would lift the front wheels in the air, but suffered from little topend although i run the xtm 457 in a extended madforce it was still too much engine for it, |
RE: Dynamite Big Red .28 in a XL?
i dont think anybody seen my response...its a 6 port
http://www.rcplanet.com/ProductDetai...YN0992&click=3 |
RE: Dynamite Big Red .28 in a XL?
Yeah, ThunderbirdJunkie saw it AFTER he'd seen a couple other places say it was a 3 port.
|
RE: Dynamite Big Red .28 in a XL?
ORIGINAL: ThunderbirdJunkie Yeah, ThunderbirdJunkie saw it AFTER he'd seen a couple other places say it was a 3 port. |
RE: Dynamite Big Red .28 in a XL?
Not yet, wimped out on the trigger pull.
Considering the Go 28 just because ThunderbirdJunkie has had so many SH engines that he wants something new and exciting, while he knows exactly what to expect from the Big Red |
RE: Dynamite Big Red .28 in a XL?
So Dynamite 28 or LRP 28 in overall performance?
|
RE: Dynamite Big Red .28 in a XL?
Probably the same
It just kinda sucks that Dynamite engines have that massive backplate that prevents using gearing that'd make the 28/30 usable in the short Savages |
RE: Dynamite Big Red .28 in a XL?
What do you mean by that? How does the backplate afec the gearing you can use? I was thinking of getting one for my savage x...
|
RE: Dynamite Big Red .28 in a XL?
What companies are the two motors made by? SH? <-Does that stand for something? So getting the Dynamite would be a better choice since it is about $25+ cheaper and it has a cool looking head! :D
|
| All times are GMT -8. The time now is 09:41 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.