rajul

My Feedback: (58)

Our new AFPD True Scale AddOn (AddOn 3) features a total of 18 models and 5 new photo-sceneries. Most models in this AddOn are designed in a 1:1 scale and have been set up to fly just like their real counterpart. The new photo sceneries have been chosen carefully so that starting and landing of the new models is no problem. However the new sceneries are also ideally suited for model aircraft flying. As a unique new feature, the Hahnweide and Jesenwang sceneries feature our new Multi-Pano technology that allows you to switch between different locations during simulation.Here is a list of included models:

•Antonov-2 / Beechcraft Baron 58 / Cap 10 / Dromader (Fieseler Storch)
GeeBee R2 / Junior / Morane 505 / Piper J3 / Speed Canard / Tiger Moth
•Warbirds: Messerschmidt Bf 109 / Spitfire Mk9
•Gliders: Banjo, DG-100, Reiher. Salto
•Helicopters: NH-90, Robinson R22
The following sceneries are included:
•Hahnweide ( a 3 location Multi-Pano scenery )
•Jesenwang airfield ( a 2 location Multi-Pano scenery )
•Eschenlohe
•Unterwössen
•Hammelburg

------------------------------------------------------------------------------------------------

Our new AFPD Aerofly Team International Edition 1 (AddOn 4) comes with 8 original plane and helicopter models of top pilots, Wolfgang Matte, Sebastiano Silvestri, Gernot Bruckmann, Peter Michel, Dominik Haegele, Petr Novotny, Olive Wessel and Nico Niewind. The world-class Aerofly Team International trains with AFPD of Ikarus. Train like the professionals and fly with the original models of the Aerofly Team International pilots.

The models correspond to those of the original model in appearance and flight characteristics. The Aerofly models of the team pilots were designed by the designers accurately tested and approved afterwards by these pilots. Get the Team Edition 1 and fly yourself the plane or helicopter model of a professional. You will be inspired.

Contents: 8 original models of Aerofly Team Internationally pilots:

Beryll | Wolfgang Matte
Hirobo Eagle Freya | Dominik Haegele
SebArt SU-29 | Sebastiano Silvestri
Kyosho Caliber 90 | Olive Wessel
A-380 | Peter Michel
TT Raptor 90 | Petr Novotny
Krill Katana | Gernot Bruckmann
Mikado Logo 500 | Nico

The system requirements for the AddOns 3 and 4 are the same as for the full version of AeroFly with the following extra requirements:
•OpenGL compatible 3D graphics card with 256MB ( OpenGL 2.0 driver is required )
•Pentium-4 or AMD-64 compatible cpu with at least 2 Ghz
•Internet connection for product activation

I will post some pictures of models and sceneries from both addons in this thread. The availability and pricing information in the USA will be updated soon. So, please stay tuned…….

rajul

My Feedback: (58)

Here are some screenshots from AddOn3

rajul

My Feedback: (58)

Here's a brochure pic for AddOn4

ALMA

Hi,
find the video's[8D]

http://aerofly.de/www/addons.html

k0brd

Mike,
Both of these addons are a must have. The scenes and planes are so good that you think you are really there flying.

I made it to all the places on the list plus a lot more
Bill

jonlowe

My Feedback: (12)

Does anyone have add on 4 in stock yet?

Jon

rajul

My Feedback: (58)

Ikarus USA should have them coming in soon. I'll keep you guys updated.

AFSalmon

My Feedback: (3)

OMP has the add-on 3 in stock and the add-on 4 coming very soon (next month) according to Ikarus.

k0brd

Hello Mike,

I got your fax, things are looking very good.

I am thinking about coming out to the airshow again next year because it was 3 days of FUN :-)

Bill

joffacn

Rajul

I have had AFPD for some time now flying planes and helis with no Add On disks. I really want some good gliding sites and gliders for slope and thermal.
What ADD ONs are recommended? Are the complete series of Add Ons required?
I have a Futaba 9C to program for gliding.

What gliders and scenery settings?
Any tips on Tx setup?

Thanks Jeff

rajul

My Feedback: (58)

Hi Jeff, I would recommend addon 2 (Starflight) which has many new gliders and sceneries for slope and thermal. You could see the models and sceneries in Starflight here http://www.aerofly.com/www/addons.html The 9C is a good radio and you will be able to program in airbrakes, spoilers, etc depending on the model

rdeutsch

Hi Jeff

You are looking for gliding places and have AddOn3 or AddOn4? Take a look on this site:



[link=http://www.roebeli.ch/wbb3/wbb/index.php?page=Thread&threadID=861]Here are more pics from the scenery...[/link]

Under [link=http://www.mfv-marbach.ch]www.mfv-marbach.ch[/link] you can download the new mountain slope photoscenery "Oberegg" for Aerofly Professional Deluxe.

It's in high resolution HD-quality and uses the new masktechnic.

The gliding place is located on a mountain in the eastern part of switzerland with a wonderful sightseeging over the Rhine Valley. From here you can see the flying flield of the "MFV Marbach"-Scenery.

[link=http://www.mfv-marbach.ch/sim/afpdscenery_download_afpd_oberegg_en.htm]Downloadpage[/link]

Have fun and best regards
Robert

theKAT

My Feedback: (1)

Are Add-ons 3 and 4 available at OMP yet?
I was supposed to get one of them for xmas from the kids. Apparently, it's STILL backordered. []

hvta53

My Feedback: (10)

I recently purchased True scale add on disk # 3 for my Aerofly professional Deluxe,after did the installation .I found out none of aircrafts on this version didn't have enough rpm for take off, some of the aircrafts just barely move (although I did tried recalibrate them many times)They only show the max rpm was:500 - 1000 rpm.I do have add on disk #1,2,4 all of them work fine! Here is my pc information:
-Hp Media center m7287c
CPU 3mhz.
Graphic card:FORSA Geforce 7900 GTX.
500 plus RAM.
Controller is Spextrum DX7
Did anybody out there has any problem like this?I did up date new patch version 1.11.7.9 still no help. Any help there I'm appreciated.Thanks!

SoCalSal

My Feedback: (16)

I ordered the same add on's before Christmas. I then got a e-mail stating that my order was on back order and would be sent out in 12-14 days. Still no add-ons nor any more e-mail from AFPD. Just read a post below yours and this guy is having some issues with the add-ons. Perhaps that is why you and I are waiting so long, maybe they are trying to get it fixed.

rajul

My Feedback: (58)

Hi hvta, I have sent a feedback to IPACS on this problem and hope to get some information soon. Will keep you updated

hvta53

My Feedback: (10)

Hi Mike,
Thanks for your respond.I'm look in to it for the fix from IPACS

rajul

My Feedback: (58)

Hi hvta, I sent you a PM

theKAT

My Feedback: (1)

My Add-On 4 CD arrived today. I can fly all the models with the exception of the Beryll. It seems to load from the menu, but when I go to fly it, I just get a black screen with the data windows in the corners (7 fps). Only way out is to exit the program and start over. Subsequent models fail after trying the Beryll.

Anyone else experience this (and have a fix for it)?

Looking at the specs, I guess it could be my 1.5 year-old Nvidia 6800 PCIx16/ 256mb is out of date []

I've got the latest Forceware driver (169.25) and the current AFPD patch (1.11.7.9) installed. Vista Ultimate with DX10. No problems prior with Add Ons 1 and 2.

Karl

rajul

My Feedback: (58)

Hi Karl, IPACS recommends at least a Nvidia 7000 series or ATI X800 video card for the 1.11.7.9 patch. Anyway, please post any issues with Addons 3 and 4 in the IPACS forum http://www.ipacs.de/forum/ so that the developers can communicate and act directly on them. Thanks

hvta53

My Feedback: (10)

Hi Mike,
Just let you know my Add on #3 now working.The problem caused by the brake feature was on from default setting.Thanks!

theKAT

My Feedback: (1)

Oddly enough, I was able to fly the Beryll last night as well as install new HD scenery. I haven't made any changes, so I have no explanation other than it's a MS operating system. Some days it works, some not so much....