Need some help identifying model
05-28-2008 | 05:59 PM
#1
Need some help identifying model
Can anyone provide some info on this One Design> It spans 91" and has around 1600 sq.in. Would like to know the source of the design, recommended power and general flying qualities.
Thanks,
AEROSCALE
Thanks,
AEROSCALE
07-18-2008 | 01:14 PM
#3
RE: Need some help identifying model
I believe it is a Bob Godfrey One design, we had one in the club years ago. It's not an eagle aviation one design, they had one piece cowls,...had one long time ago!
Hope that helps
Bill Holsten
Hope that helps
Bill Holsten
07-18-2008 | 01:18 PM
#4
RE: Need some help identifying model
I believe it is either a Bob Godfrey One design or it could be an AeroTech One design. It's not an eagle aviation one design, they had one piece cowls,...had one long time ago!
Hope that helps
Bill Holsten
Hope that helps
Bill Holsten
11-19-2008 | 07:11 PM
#5
Junior Member
Joined: Nov 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
From: , FL
RE: Need some help identifying model
looks like a one design by bob godfrey. his son still makes planes in fl. he still has parts for that plane. his name is robert. you can contact him at bobflies.com. i have the same plane with a fpe 4.3 in it and it flies great, it just likes to come in a little fast to keep from tipping a wingtip. nice plane its a 38% i know that seems big for its size but they were a small plane in full scale.it wont 3d but it will do precision. hope this helps.
