Hangar 9 Ultimate performance
 

I would like to hear some first hand reports as to how this plane flys and which engine you are using. I am interested in how it flys sequences not freestyle.

Thanks

RE: Hangar 9 Ultimate performance
 

I flew my friends H9 Ultimate through the unlimited sequence. It has a 3W 150 TOC, tried 2 props, the 3W 3D prop and the Fuchs 32x12. Flew sequences better with the fuchs. Airplane has no bad tendancies for IMAC, just takes a little more work that comes with flying a bipe. Only takes a couple of minor mixes, and the only one he has programmed in is for proverse roll. The airplane is very smooth, and to me, is almost as good as a Carden Extra or Fiberclassics. Hope this helps. It does also, 3D very well too.

RE: Hangar 9 Ultimate performance
 

I'm flying mine with the ZDZ-210 turning an MSC 34x12. TONS of power. Very slow paced flight. It does take a bit more work than a monoplane, but it is very smooth and rolling circles are EASY. The right thrust as set by the firewall is incorrect. You need about 1 degree more and if your CG isn't correct it will pull to the canopy on uplines. MOST of them coming out of the box are noseheavy. Move your rudder servos to the tail to fix this.

Overall it's a very good airplane.

RE: Hangar 9 Ultimate performance
 

This is mine! about 20 min out of the box! just got it the other day!

Scott

RE: Hangar 9 Ultimate performance
 

I'v had mine for several months noe with a 3-w 150 and am having a ball. I'm going to try the 3-w 200 soon.