RCU Forums - Basic Setup for 50cc IMAC

RCU Forums (https://www.rcuniverse.com/forum/)

- IMAC (https://www.rcuniverse.com/forum/imac-88/)

- - Basic Setup for 50cc IMAC (https://www.rcuniverse.com/forum/imac-88/8802678-basic-setup-50cc-imac.html)

blue77

05-27-2009 10:34 AM

Basic Setup for 50cc IMAC

What is a good basic setup for a beginner IMAC pilot, especially prop and throws.....plane is an Airwild Edge 540T with a DA 50? Thanks for help and ideas....WC

exeter_acres

05-27-2009 11:11 AM

RE: Basic Setup for 50cc IMAC

Mezjlik 23x8 for the prop......

throws?

always less than you think.
10 to 12 degrees on the ELE....

around 20 degrees on the ailerons

around 35 for the rudder (I flip a switch to higher rate for Hammerheads)

I also use a snap condition to change the rates for snaps based on stick and throttle positions, but no need to complicate it now......

the above numbers are just a starting point... season to taste...

exeter_acres

05-27-2009 11:13 AM

RE: Basic Setup for 50cc IMAC

How far are you from Charlotte? There is a contest up there in a few weeks... just come on out and there will be PLENTY of people that would be happy to help out!

All times are GMT -8. The time now is 09:28 PM.