DX7 Flap on Boomerang Intro
#1
Member
Thread Starter
Join Date: May 2003
Location: London,
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
DX7 Flap on Boomerang Intro
Hi Danny
The Boomerang has a single central flap between the twin booms.
I would like to use the 3 position switch to operate the flap.
I would also like to mix in some down elevator with the flap.
If I plug the flap servo into Aux 2 how can I ajust it with the "Flap System" menu, this menu only seems to move the ailerons as flaps.
Many Thanks
The Boomerang has a single central flap between the twin booms.
I would like to use the 3 position switch to operate the flap.
I would also like to mix in some down elevator with the flap.
If I plug the flap servo into Aux 2 how can I ajust it with the "Flap System" menu, this menu only seems to move the ailerons as flaps.
Many Thanks
#4
RE: DX7 Flap on Boomerang Intro
In order to use the flap channel with the flap system, you will need to turn flaperon off, plug the flap servo into aux 1, then use aux 2 for your second aileron channel, first by inhibiting aux 2 in the input/switch select function, then setting up an aileron to aux 2 program mix, and set the rates to 100% in both directions.