JR 10X radio three modes for Yak 45 50cc
 

Greetings,

Could any one advice on how to program my new JR 10X radio for a Yak 45 50cc model? I am trying to program it for three modes, 3D, Normal, and Landing mode. Any recommendation on rates is highly appreciated as well.

Thank you all.

RE: JR 10X radio three modes for Yak 45 50cc
 

If you wish to use flight modes, go to code 17 and press page and select the switch you want to use for the flight mode switch. Rates will depend on personal preference. For an airplane that is set up for 3D, I generally start with 55-60% expo at high rates, I generally set a mid rate to 70-75% with 45% expo, and low rate to around 45-50% with 35% expo and adjust to suit my tastes after flying the model. These are all personal preference however. You can find some other programming assistance here.

http://www.horizonhobby.com/Products...odID=JRP1646**