RCU Forums - K80 Temp problem

RCU Forums (https://www.rcuniverse.com/forum/)

- KingTech Turbines International (https://www.rcuniverse.com/forum/kingtech-turbines-international-521/)

- - K80 Temp problem (https://www.rcuniverse.com/forum/kingtech-turbines-international-521/11649014-k80-temp-problem.html)

GSR	05-21-2018 05:17 PM

K80 Temp problem

Anyone have this issue:
Temp on GSU will not register-Just stays "000" All the connections are proper. It goes into start mode but of course fails as it sees no temp rise. RPM reads fine. Re Bound and relearned RC. Scott

gunradd

05-21-2018 05:25 PM

Quote:

Originally Posted by GSR (Post 12433953)

bad temp probe. Send it in

jonkoppisch

05-22-2018 03:09 AM

My temp probe just died in my k100 with 11 hours. They repaired it but it looks like it's going to cost me $250..

ECalderon

05-24-2018 07:56 AM

Quote:

Originally Posted by jonkoppisch (Post 12434043)

My temp probe just died in my k100 with 11 hours. They repaired it but it looks like it's going to cost me $250..

Shouldn't that be covered by the garantee?

Eduardo

jonkoppisch

05-24-2018 08:30 AM

Sure wasn't..

gunradd

05-24-2018 08:48 AM

All electronics are covered for one year. Engine itself is lifetime accept bearings.

xoxomeowmixoxo

05-24-2018 01:30 PM

Quote:

Originally Posted by jonkoppisch (Post 12434043)

My temp probe just died in my k100 with 11 hours. They repaired it but it looks like it's going to cost me $250..

all electrical components and all frictional materials have ONE year warranty coverage. it's all in the instruction manual.

jonkoppisch

05-31-2018 04:14 PM

Lol, I was wrong. I only had 6 hours..

All times are GMT -8. The time now is 02:24 AM.