meanrc

My Feedback: (2)

I would be in for a panel.\\

Come up with a design for the ****s and there are many screen printers out there that could do the job\\ I have one 2 blocks from me that makes thousands a year.

Jk

jkr_1100

My Feedback: (15)

planning to start a Sig 1/4 scale clipped wing this winter.

jkr_1100

My Feedback: (15)

YAY 13 pages

jkr_1100

My Feedback: (15)

some specs on popular kits. for comparisons sake. this is part of my research that lead me to choose the Sig 1/4 scale.


sig 1/4 clipped sig 1/4 full wing Great Planes .60 great planes .40 Balsa USA 1/4 Balsa USA 1/3
span 86 105 83/90 61.5/76.5 108 141
fuse length 67 67 56.5 49 68 89
weight 14-15 14-16 9.5-12 6.5-7.5 12 - 14 30-35
Price 233.99 226.99 199 $129 199 639.95
spec engine .60. - .90 or .90 - 1.6 4 stroke .60. - .90 or .90 - 1.6 4 stroke .60 - .90 or .70 - .91 4 stroke .40-.60 or .48- .80 4stroke .60-1.08 2 stroke .90 -1.2 4 stroke 45-70cc gas or 2.7 to 4.2

igoren

My Feedback: (23)

COUNT ME IN , 1/3 SCALE BUSA L-4 GRASSHOPPER
BRISON 2.4 ENGINE , 20-6/10 PROP, SPECTRUM 2.4 7CH , JR 10X RADIO

RC_AVIGATOR

My Feedback: (1)

Boy thats nice-more pic please

igoren

My Feedback: (23)

YOU ASKED FOR IT :

lowbubba

My Feedback: (1)

Very nice.

Cub Man

My Feedback: (50)

#1 Cub Man - Charles Brooks
#2 Minn Flyer - Mike B.
#3 acerc - Robert R
#4 Arup -
#5 Frequent Flyer -
#6 bikerbc -
#7 GAP RCU -
#8 rafeeki -
#9 Scirocco 14 - Mark
#10 Lins - Lindsey G
#11 CK1 – Chris
#12 Jaybird –
#13 heritageman -
#14 Live Wire - Larry K
#15 Saito18 –
#16 davidgeorge212 –
#17 WacoNut –Anthony
#18 raydar –
#19 no1isnormal –
#20 JH313 –
#21 JNorton – John
#22 FJRrider –
#23 lovetoflyguy – PJ
#24 Edwin – Edwin
#25 Lavell – Lavell
#26 crash bandicoute
#27 do335a –
#28 fred985
#29 Pa-18cub150 –
#30 cessna579 –
#31 cubcrasher –
#32 mac1va –
#33 morganflyboy –
#34 Steve Landron –
#35 mintie –
#36 Gordie M –
#37 extra-nut –
#38 snowball –
#39 eastkurt - Kurt
#40 JerryM –
#41 rcavi8or –
#42 meanrc –
#43 Rc Overkill –
#44 oldiron410 –
#45 Hill202 –
#46 weathervane – Andrew
#47 SunDevilPilot –
#48 iflyj3 – Dan
#49 gluemaster –
#50 EddieC –
#51 CanDo – Les
#52 dabigboy – Matt
#53 [email protected] –
#54 woodworm –
#55 skipb
#56 mrdhub – Dan
#57 Homer712
#58 scaleman57 –
#60 psheffield
#61 quiltsfly
#62 G.Barber
#63 bobbailey
#64 scflyboy
#65 Cub Flyer Fresno
#66 FILE IFR - Mike T
#67 talob – Mike
#68 Lowvoltage – Joe
#70 Glyder – Chuck
#71 smkrclfyer –
#72 jeffEE
#73 GW –
#74 lever02
#75 AB Bob – Bob
#76 rede2fly –
#77 Barn-E-Stormer
#78 Ray S. –Ray
#79 Daniel-EL
#80 ExcaliburIII – Richard Longfellow
#81 jrb1 -
#82 on_your_six –
#83 BGCombs
#84 RevGQ
#85 jkr_1100
#86 Dope Fiend
#87 paero-RCU
#88 .50cal
#89 mrshea
#90 Cougar-RCU
#91 glenladen
#92 cublover
#93 lowbubba
#94 steve
#95 Gray Beard
#96 roaddog2
#97 biam
#98 rcpilotaviator
#99 funtana1
#100 rcavi8or
#101 GPutt33
#102 actionjackson
#103 sj3cub
#104 dreamwever
#105 phatbob02
#106 igoren

roaddog2

igoren ,
Some real good photos of a DAMNFINE model!
My congratulations, Sir!
RD CB# 96

Steve

My Feedback: (54)

Got my BME 90! Its going to be a good fit I think.

acerc

Steve, what are you doing for exhaust? I have had a couple of those 90's and I know your not putting the stock pipe on it, right.

Steve

My Feedback: (54)

I'm not quite sure what to use yet!! I've looked at the Slimline pitts and it may not fit behind the engine??? I've also looked at the Bisson inverted muffler,(banjo style), and it may be the one I try first. Any help in that area would be great!

acerc

I would like to suggest getting with Kevin at   http://www.jtecrc.com/  They will take your manifold and make what ever you want. And I think they are reasonable. IMHO

acerc

They are currently makeing me one to my measurements for my cub.

G.Barber

My Feedback: (1)

Oh yes! Jtec mufflers work very well, their prices are reasonable, and they are great people to work with. +1 for Jtec from me!

Steve

My Feedback: (54)

Sounds good to me. I'll give them a call and see what they can do with the space I have.

cubcrasher

My Feedback: (6)

Steve, Is that the super tigre conversion engine? Also what cub is it going in?
 

R.L.  Cub brother #31

Steve

My Feedback: (54)

Yep, its a BME 90. A converted Super Tigre from BME engines. Its going in my Sig 1/5 scale Clipped Wing Cub. I've had the Cub for many years now but did'nt fly it much. I had a Saito 130 TDP in it, but it was way too heavy for the Cub. I was able to remove a bunch of tailweight.

ARUP

I started an Aviation Products Piper Cub pedal plane for my neighbor's grandson after receiving kit from UPS today. Gotta start 'em young, dontcha know! I'm hoping he will become a member of the Cub Brotherhood, eventually... say... #482,729!!!!!

crash bandicoute

OMG... kind of off the subject, but it pertains to my cub. i just started recovering my cub today, using koverall and stix-it. this stuff is awesome!!! i'm not ever going back to monkeykote!!! i got the tail feathers and the horizontal stab and door completed. when i was removing the monkeykote from the cabin back to the tail, i broke the top-side stringers or they got broke from the crash, so i have to replace those before i can cover the fuse and vertical stab. i'm going to try covering with a single piece, so as to look actual "scale". just thought i should throw this out there for anyone who has never used fabric. i was leary at first, but like i said, it's a little more of a process, but, i have no wrinkles, creases, NOTHING!!! if you're skeptical, go for it. a cub in monkey- or ultrakote just ain't right. i appologize for my previous monkey-koted cub and promise to never do it again. setting up for rib stitching shinanigans next. it's going to be insignia blue, marine markings. DO THE FABRIC!!!

Edwin

My Feedback: (2)

Hey crash,
Insignia blue, what scheme you doing? This is mine, just finished its base coat. The other pic is the scheme I'm doing. Its coverd in koverall and painted with warbirdcolors paints. Wonderful paint to use. I'm waiting on the rest of my decals from Cajun RC. I made a size mistake on some of the text and had to reorder a couple. I tried painting insignias on my ziroli stearman last year that turned into a disaster. All the prep work to keep it from bleeding under my templates didnt work. I had to go over it again with a touch up paint brush. So its vinyl decals this time with clear coat.
Edwin

crash bandicoute

this is the scheme i'm going for. your paint,...did you brush or spray it on? i'm thinking of using their paint line, but i haven't received an e-mail back from them about my order. so if i don't hear anything from them by the time i get around to painting, i'm going to home depot and color matching a quart, getting some flotrole(sp???), and going to town on it with that. one of the two. not sure on which of the markings yet.

Edwin

My Feedback: (2)

I saw that earlier, cool lookin. I sprayed it on. Auto touchup HVLP (harbor freight cheapie with the 5oz cup) for the big areas and a pasche single action for the smaller areas, dark color. I'm using glow, saito 1.20 4-stroke. I liked using WBC paints cause it was really easy (kind of a relative term when spraying paint, lots of inbetween cleanup involved). WarbirdColors has been having trouble with his web site for awhile now. He was pretty good about getting back to me in a day or two, had to order over the phone. A buddy uses latex alot and gets really good results. Most of his planes are hard surfaced glass jobs.
Edwin

I just looked at WBC's website. He's having supplier troubles. I hope thats not a sign of things to come. An alternative is Nelson Hobby paints. Its a similar product. I used it first and had equally good results. http://nelsonhobby.com/ Same application technique, cleanup, and cross linker mix. I think Nelsons was sold about a year ago. Web site is still up and active. I tried nelsons because they said they could color match ultracoat. Maybe at a distance, but not up close. I dont see that statement anymore.

rcavi8ter

My Feedback: (19)

CubMan I too would like a panel for my 60% L4. Let me know if you need a template and how much.