balsa triangles
03-27-2018 | 02:58 PM
#3
My Feedback: (5)
Joined: Dec 2011
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
From: Holland Patent,
NY
Halflight,
Try National Balsa in Ware, MA (New England). They have triangular stock in balsa/bass/and spruce. Quick service and good prices.
Note that if you plan to attend the Toledo RC Expo on April 6-8th, Nat'l Balsa is an exhibitor and usually has a HUGE stock of balsa and other model wood products for sale at show prices and no shipping.
Regards,
Art ARRO
Try National Balsa in Ware, MA (New England). They have triangular stock in balsa/bass/and spruce. Quick service and good prices.
Note that if you plan to attend the Toledo RC Expo on April 6-8th, Nat'l Balsa is an exhibitor and usually has a HUGE stock of balsa and other model wood products for sale at show prices and no shipping.
Regards,
Art ARRO
03-28-2018 | 07:38 AM
#5
Also if you are using the wood in front of the CG and weight is not going to be a problem. I often use square sticks... Simply because its ten times easier to clamp it in good and have it stay tight in the joint as your glue dries. White glue builder here 
so having the part stay in place for longer dry times is important.
so having the part stay in place for longer dry times is important.
03-28-2018 | 01:13 PM
#6
Joined: Aug 2002
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
From: State College,
PA
I cut mine on the table saw but I might build one of these.
https://www.thingiverse.com/thing:2016991
https://www.thingiverse.com/thing:2016991
