Phoenix Aurora (PH188) Aileron Control Horns too Large
#1
Junior Member
Thread Starter
Join Date: Feb 2021
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Phoenix Aurora (PH188) Aileron Control Horns too Large
I'm starting build of an Aurora PH188 ARF
The included instruction booklet indicates that the flat attachment plate of the aileron control horn should be able to fit entirely within the thickness of the aileron. However, I found that flat plate of the control horn included in my kit is 0.665" wide, but the aileron itself is only 0.575" inches thick. The control horn does not fit onto the aileron.
Has anyone built one of these, and have any wisdom to offer?
The included instruction booklet indicates that the flat attachment plate of the aileron control horn should be able to fit entirely within the thickness of the aileron. However, I found that flat plate of the control horn included in my kit is 0.665" wide, but the aileron itself is only 0.575" inches thick. The control horn does not fit onto the aileron.
Has anyone built one of these, and have any wisdom to offer?