4 Star 60 Two piece Wing Conversion
10-05-2007, 09:23 AM
#1
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Cedar Grove, NC
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
4 Star 60 Two piece Wing Conversion
I was thinking of build a Sig Four Star 60 and making the wing fit together as a two piece
Has anyone done this with this plane?
Is there a thread that shows how?
Any help appreciated.
Has anyone done this with this plane?
Is there a thread that shows how?
Any help appreciated.
11-09-2007, 08:58 AM
#2
Member
Join Date: Jul 2004
Location: Fort Myers, FL
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4 Star 60 Two piece Wing Conversion
Unless you travel by bicycle, why would you want to go to all that trouble to make an inferior product? A friend built a Dynaflite PT-19 with a two-piece wing, for space problems, and he did it with an aluminum-tube joiner. This requires a carbon-fiber or aluminum tube in each wing half. After all that work, he bought a van.
Compared to the one-piece wing, it is a lot of work.
John Agnew
Compared to the one-piece wing, it is a lot of work.
John Agnew
11-09-2007, 09:50 AM
#4
Senior Member
Thread Starter
Join Date: Oct 2006
Location: Cedar Grove, NC
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
RE: 4 Star 60 Two piece Wing Conversion
clipping the wings is a good idea.... ended up buyin a Twist 60 instead. LOL
Time to get a big van and leave the wing bolted on
Time to get a big van and leave the wing bolted on
