RCU Forums - Started my first kit build

Page 2 of 2

Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)

- Kit Building (https://www.rcuniverse.com/forum/kit-building-121/)

- - Started my first kit build (https://www.rcuniverse.com/forum/kit-building-121/10528142-started-my-first-kit-build.html)

Gray Beard

06-01-2011 05:54 PM

RE: Started my first kit build

I have a plane on my bench right now too. It is a scratch build and I'm using a lot of light ply and hardwood sticks so I'm using a lot of epoxy. When I go to Harbor Freight I always pick up a couple of bags of the acid brushes I saw mentioned. When I build there is usually some 1/4X1/4 sticks laying on my board so I just taper an end for epoxy mixing and spreading on the small stuff and the brushes on the bigger parts. Very cool plane you have!!

bigmac15

06-02-2011 04:17 AM

RE: Started my first kit build

Quote:

ORIGINAL: huck1199

Keep up the good work. We are almost neighbors, I'm in Lancaster NY and belong to the RC Pulsers of Western New York. I have never been to your events but several of our club members visit.

Thanks! Our heli show gets a lot of attention because of the national level talent that shows up but I am more of an airplane guy. I was hoping to fly in our show at the end of summer but now have to find something to fly.

All times are GMT -8. The time now is 09:03 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page