Help Identifing this kit?
 

Need some help identifing this kit for a friend.
Kit looks like it still needs top portion built, I am assuming it is a bi-plane by the lower wing saddle.
The tail with the big carved block on lower end has me stumped.
Thanks for any help or guesses.

RE: Help Identifing this kit?
 

Looks like it might be a Stearman Kaydet judging by the odd shape you refer to at the aft end of the fuselage. Seems a bit boxy for a Stearman but maybe it's the pictures.

http://www.airliners.net/photo/Stear...det/1775679/L/

RE: Help Identifing this kit?
 

I was thinking Sterman too,, maybe a Midwest Kit based on the construction techniques,, Midwest loved that LitePly in the late 90's

RE: Help Identifing this kit?
 

Will see if I can look through a barrel of plans that might go with it. I inhereted a bunch of stuff from a buddy who passed away. And gave fuse to a friend. Will see if i have anything in that catagory. I am into jets and warbirds. Don't know much about bipes.

Has notches for planking. Also could it be a waco?

RE: Help Identifing this kit?
 

Those are for Stingers,, not planking

RE: Help Identifing this kit?
 

Don't have it handy to compare as I'm at work, however it looks a lot like my Midwest Super Stearman, which would be consistent with what others have said.

Terry

RE: Help Identifing this kit?
 

My bad, thats what i meant.

RE: Help Identifing this kit?
 

I don't think Stearman, guys. It didn't look like it to me, so I went out into the garage to look at mine, and there are too many differences to even begin to list.

Les

RE: Help Identifing this kit?
 

Les,, You sure your's is a Midwest Kit?

Check these pics out http://www.baderstein.com/stearmanproj.htm sure looks the same to me

RE: Help Identifing this kit?
 

If you compare the pictures on this other build thread with this one :

Look at the 2 slots in the firewal, look at the 4 round holes in the deck at the front. That looks like the same kit. And i general, it looks like Midwest type construction to me.

The wonders of a forum like this, huh :-)? I have no idea how you'd ever identify a half built airplane otherwise!

Kris

RE: Help Identifing this kit?
 

Nice deduction guy's.

RE: Help Identifing this kit?
 

"Les,, You sure your's is a Midwest Kit?"

Nope. Obvously not. Mine is all rounded fuselage. Going back through my hard copy photo album, it claims to be a Sterling.

Les

RE: Help Identifing this kit?
 

Sounds right,, the Sterling and Royal kits were Old School and built completely different,, I had a Royal kit,, loved it

RE: Help Identifing this kit?
 

That is a Midwest Stearman, no doubt. I built one of those heavy suckers way back when for a guy. Some of them came with cabanes that were either shaped wrong, or drilled wrong, i can't remember now. You could not get the proper incidence on the top wing AND keep the N-struts as per design no matter what you did.

RE: Help Identifing this kit?
 

Thanks for all the replies guy's, would anyone happen to have plans that can be copied. I will pay for them.

Thanks
Blazer