Need Input!!!
 

First of all I've all but given up on ARF's so I need input on my next kit.
I lost my ultra stick to a Radio Glitch...Honest!!!! I had reason to not trust this radio but flew with it anyway cause it was intermittent and everybody says it's something you did not the radio or anytime something goes wrong and you mention the radio you get jabbed by the guy that has....... You know the drill, anyway my stick quit responding at about 50 feet or so and at half throttle it went in nose first!!! the radio went into the trash this time as well as the airframe so I've got a Motor that needs a home.
It's a .75 SuperTiger, I want a fast building kit, Laser cut, Mono, that is slightly over powered with this motor I like scale and fly most any airframe.
I'm wanting to hear from people that have had experiences with a kit that fits this description.

Thanks, Miloh.

RE: Need Input!!!
 

How about a Sig Hog Bipe .60? I'm Getting ready to build one. I have heard that it is a fast building kit and has great flight characteristics. Lot's of laser cut parts.

Just my $.02

RE: Need Input!!!
 

How about a TF Contender? The airframe builds fast with the exception of the cowl. It needs a lot of shaping and sanding. It doesn't take a REAL long time to form it just some patience in the carving and sanding area.

When I built mine I put a MDS 48 in it - this turned out to be a mistake. I have it hanging from my basement ceiling waiting for a 60 engine in it. With a ST 75 it would be a very cool plane to fly. The center flap does some good things.

RE: Need Input!!!
 

Two wings take longer but I have thought of that one, would like to hear from someone that has built one tho.
I hate suprises and this summer I have several to my credit doing without asking first.
Thanks and keep em comming.

Miloh.

RE: Need Input!!!
 

Arebeck

Is that a contender in your avitar?? And tell me more about the center flap.
How about a pict??

Thanks, Miloh

RE: Need Input!!!
 

Forget the imitations.

BTE Venture 60.

Bill.