RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Kit Building (https://www.rcuniverse.com/forum/kit-building-121/)
-   -   Quad flap for Sig 4*? (https://www.rcuniverse.com/forum/kit-building-121/1769197-quad-flap-sig-4%2A.html)

HeadFred 04-28-2004 10:13 PM

Quad flap for Sig 4*?
 
Has anyone modified a 4* with a quad wing setup like a H9 Ultra Stick. I was also wondering witch radios would allow the use of full
span ailerons, ailerons+flaps, crow.


_________________
any help greatly appreciated
Head Fred

Ed_Moorman 04-29-2004 07:44 AM

RE: Quad flap for Sig 4*?
 
I took a Joss Stick and set it up with the Ultra Stick quad flaps. I recall I used 7 channels (everything except gear) on my JR 8103 so I would say you need an 8-channel radio. The Ultra Stick manual, which you can download from the Horizon site, shows the programming for several radios, including a Futaba 8-channel. I believe you do not get all the functionality with a radio of less than 8 channels.

On your 4*40, make the flaps about 8 inches long and the rest ailerons. You'll need 4 servos in the wings and lots of extensions. If you want the full effect of air brakes, you'll need to widen the controls to 2 1/2-3 inches.

In addition, cut off 1 rib on each side, add an inch to the rudder and 1/2-1 inch to the elevator. The plane rolls better, doesn't land any differently and is generally better in aerobatics.


All times are GMT -8. The time now is 12:06 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.