RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Kit Building (https://www.rcuniverse.com/forum/kit-building-121/)
-   -   What kit to build for........ (https://www.rcuniverse.com/forum/kit-building-121/2358418-what-kit-build.html)

EVOL 11-19-2004 01:15 PM

What kit to build for........
 
......a skydiving plane. i want to build something over the winter but i am having a tough time findng the plane i want. it will be used to drop skydivers and i would like it to be big. however, i have a small car so i would say about 85" wing at the most. the Senor telemaster is too big. any ideas?

JNorton 11-19-2004 03:43 PM

RE: What kit to build for........
 
Only one choice. :D

BTE Flying King http://www.btemodels.com/flyin_king.html

Bo Denmark 11-19-2004 04:05 PM

RE: What kit to build for........
 
How about this... Don't know if they are sold in the U.S though...

http://www.jamara-produkte.de/OSSHOP...products_id=81

EVOL 11-19-2004 06:00 PM

RE: What kit to build for........
 
i would really like a platus porter but i havent found a good kit for one yet. i have been thinking of the flying king......looks like a pretty nice plane that comes with great hardware. anyone know of a good porter kit?

JNorton 11-19-2004 06:51 PM

RE: What kit to build for........
 
http://www.mraerodesign.com/pc6/PC6.HTML but it is a 120" W.S. The only Pilatus Porter kit I could find.

One of the members of my club uses his Flying King for a candy drop. He raved about the build quality. It rolls very axially and has very tight loops, now I'm not saying it is an Extra but it's aerobatics is much better than my LT-40. :)

John

8178 11-19-2004 07:44 PM

RE: What kit to build for........
 
If you are like me, ARFs aren’t my favorite but the Great Planes Big Stik 60 ARF is a monster with a 66.5 wing span (1k sq. in.) and it’s covered with MonoKote. It will take a .60-.91 size engine. The ARF is well done and will lift large stumps!

phread59 11-19-2004 09:35 PM

RE: What kit to build for........
 
Kadet SR would do fine. As would the LT-40.

Mark Shuman

EVOL 11-19-2004 09:55 PM

RE: What kit to build for........
 
well i have been researching the Flyin King and im so far leaning toward it. i have flown a Kadet Senior before and i really like it but im looking for a taildragger.

has anyone built a drop bay that they would like to share? im thinking of a few different ways but i would like to see everyones ideas.

luckyned 11-19-2004 10:57 PM

RE: What kit to build for........
 
Hmmm.. how do you convince them to jump? Balsa brains?

I'm sure I sound like a smart-arse but I'm really just THAT new to rc aircraft. I'm on my 1st kit plane and my kid is already asking.."where are bombs and machine guns?" It makes me pause...hmmm..

where and what are those pieces of balsa wood and how dare I place them.. that makes the plane fly!!!! :D

Gray Beard 11-20-2004 09:48 PM

RE: What kit to build for........
 
I built the Telemaster for my club as A trainer and ended up being the keeper of the plane, I had A Hundi Scoop at the time , the seats in back went down and I was able to slide the wing through the trunk up to the front window and had the fuse nose on the floor up front and just touching the roof, I also hauled an Up-Roar in the back too so it can be hauled if you work at it.
The Flying King is A better plane though if you have the bucks for the kit, it's well built and they feel worth the price, so do I.
No mater how you do it though, Giants and small cars are A pain.


All times are GMT -8. The time now is 09:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.