Goldberg tailwheel question
 

Guys,
I'm building a Four Star and I'm using one of the #230 Goldberg tailwheel assemblies and I've never really hooked up the springs on these before. If someone has a picture of their's or and explanation of how to attach the springs I would be grateful.
I assumed the the spring should be cut to length and sort of "screwed" into the brackets near the wheel with the loops of the spring and then the long straight ends are suppose to be pulled up close to the horn brackets on the rudder and then wrapped around itself. If so, I assume the spring should be stretched open some?
Like I said, a picture would be very helpful!!

Thanks!

RE: Goldberg tailwheel question
 

Were there no instructions with the bracket? If not, go to your LHS and ask to CAREFULLY open a package and look.

Dr.1

RE: Goldberg tailwheel question
 

Oh there's instructions, but all it says is to "attach" the springs, and it has an exploded view, which is of no help for this.