wing alignment on profile
 

I recently purchased a cg extreme used. When I got home I noticed the wing alignment looked to be off. When I measured from the nose of the plane to the wing tips the measurements were good. But from the tail to the wing it was off about 3/4 of an inch from one side to another. With this being a fun fly plane and probably wont be flown very fast do you think that it will not fly right? I hate to have to cut the wing loose to realign it,
Thanks
Jeff

wing alignment on profile
 

There should be no problem ! I wouldn't worry about it.
The Extreme 330 is an awesome flying profile capable of all the 3D stuff.