4*60 servo hookup
 

Building a 4*60, almost ready to cover wing. What do I need, servo extensions or long "Y" harness in relation to recevier location. Thanks.

RE: 4*60 servo hookup
 

I would do extensions from the servo out to the exit holes in th wing then a short Y from the receiver.

RE: 4*60 servo hookup
 

something else you might think about, depending on YOU. use longer extensions to get out of the wing AND plug into the receiver. that way IF you want to you can play around with the flaperon function.

RE: 4*60 servo hookup
 

Thats what I did with mine. A longer extention from the wing servos then two short 6" ones from my reciever. works fine

Rob

RE: 4*60 servo hookup
 

Gentlemen, thanks for the info, now back to the bench. :D