RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   Kit Building (https://www.rcuniverse.com/forum/kit-building-121/)
-   -   Need help identifying kit (https://www.rcuniverse.com/forum/kit-building-121/5852367-need-help-identifying-kit.html)

bobj62 05-14-2007 09:03 AM

Need help identifying kit
 
1 Attachment(s)
Does anyone know who made this kit, it's an older version kit with a 86" wingspan.

hrrcflyer 05-14-2007 12:05 PM

RE: Need help identifying kit
 
Bob,

FWIW. The high horizontal stab leads me to believe it may be a Cap, but on the other hand, most of the Cap's I have seen the stab is quite a bit further forward than the one in the picture. Also, the cowl doesn't look like any Cap I have ever seen.:eek:

Sorry for any coinfusion, maybe I souldn't have responded to this post until after I took a closer look at the picture.

Fly safe and have fun!!:D:D
David

TLH101 05-14-2007 12:07 PM

RE: Need help identifying kit
 
It's an Extra 260 or 230, I think. It it has foam wings, may be an old Pirate Models kit. If it's built up, may be the old Ace kit.

Mode One 05-14-2007 05:21 PM

RE: Need help identifying kit
 
It's not a Laser 200, is it?

Flytoolow 05-14-2007 08:50 PM

RE: Need help identifying kit
 
EXTRA! who's....i couldn't tell you, what are build features you can see?

bobj62 05-15-2007 06:50 AM

RE: Need help identifying kit
 
To all, thanks for the help. It's a Power House Aircraft (formally pirate models) Extra 260. Their website has construction photos which show the same internal build up as mine. The covering looks like it was copied from Jim Osborne Sr's Extra 260, with different colors. Mystery solved.
Thanks again,
Bob


All times are GMT -8. The time now is 06:27 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.