RCU Forums - Where is recommended CG on Sig 4* 40?

RCU Forums (https://www.rcuniverse.com/forum/)

- Kit Building (https://www.rcuniverse.com/forum/kit-building-121/)

- - Where is recommended CG on Sig 4* 40? (https://www.rcuniverse.com/forum/kit-building-121/6001656-where-recommended-cg-sig-4%2A-40-a.html)

Lynner532

06-18-2007 09:04 AM

Where is recommended CG on Sig 4* 40?

I got a 4*40 in pieces and am rebuilding it. I would like to know where the recommended CG is, but I don't have a manual. I've been searching the forums and have read alot about the 4* but I haven't stumbled the CG info. I tried the SIG web site too but no luck. Can anyone help me out?

d_bodary

06-18-2007 09:25 AM

RE: Where is recommended CG on Sig 4* 40?

i would set it right on the spar. upside down. If all else fails try calling Sig. or set it at 30% back from the leading edge. which will end up right on the spar.

rwright142

06-18-2007 09:34 AM

RE: Where is recommended CG on Sig 4* 40?

d_bodary is right on. The manual says to balance it as close to the spar as possible.

Lynner532

06-19-2007 12:32 AM

RE: Where is recommended CG on Sig 4* 40?

That's what I was thinking but I wasn't sure. Thanks for the quick feedback!

All times are GMT -8. The time now is 03:34 AM.