Servo savers
#1
Senior Member
Thread Starter
Join Date: Feb 2008
Location: minden,
NV
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Servo savers
So I know that the MGT servo saver is like the best one for my LST, but I need 2 of them for my Hitec servos. But 8 bucks each is killing me because I'm only 14 and don't have a lot of money.
So what do you think of http://www.rcplanet.com/Kimbrough_Se...r_p/kim131.htm
This one is cheap, but I don't know if it has the springs inside. http://www.rcplanet.com/Racers_Edge_.../rce10325p.htm
So what do you think of http://www.rcplanet.com/Kimbrough_Se...r_p/kim131.htm
This one is cheap, but I don't know if it has the springs inside. http://www.rcplanet.com/Racers_Edge_.../rce10325p.htm
#4
Senior Member
Join Date: Oct 2006
Location: ontario,
ON, CANADA
Posts: 2,184
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo savers
Because they Suck.......The Spring in them Don't hold tension for very long (Like a Gallon or so Max) And then there full of Slop which will make it so your Truck Won't Center or Steer very Good......
In the 5 or 6 Years Since the LST Trucks have been out I've Seen Peeps Try just about Every Servo Saver made....You Can't Beat the Stock Savers with a few Extra Springs for JR Servos Or MGT Savers (Again with a Extra Spring) for Hitec Servos.....
In the 5 or 6 Years Since the LST Trucks have been out I've Seen Peeps Try just about Every Servo Saver made....You Can't Beat the Stock Savers with a few Extra Springs for JR Servos Or MGT Savers (Again with a Extra Spring) for Hitec Servos.....
#5
Senior Member
Join Date: Aug 2007
Location: Chicago,
IL
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo savers
Look at the chop shops, always cheaper
BIN
http://cgi.ebay.com/NEW-ASSOCIATED-M...lenotsupported
Auction
http://cgi.ebay.com/NEW-Monster-GT-S...lenotsupported
Throw away what you don't need...
BIN
http://cgi.ebay.com/NEW-ASSOCIATED-M...lenotsupported
Auction
http://cgi.ebay.com/NEW-Monster-GT-S...lenotsupported
Throw away what you don't need...
#7
Senior Member
Join Date: Aug 2007
Location: Chicago,
IL
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
RE: Servo savers
Hu? I'm not talking about switching to one. That link won't even work! There is an MGT servo saver on the linkage. Take it, and throw the rest away! Then it's only $3 each servo saver.