Predator for AP ship?
10-02-2005 | 10:13 PM
#1
Thread Starter
Junior Member
Joined: May 2004
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
From: Easthampton, MA
Predator for AP ship?
Seems natural, anyone have any thoughts?
Tower carries 2 different models now.
a 38 incher...
http://www2.towerhobbies.com/cgi-bin...?&I=LXJWJ5&P=7
and a 27" FF that could probably be converted...
http://www2.towerhobbies.com/cgi-bin...?&I=LXHST2&P=7
Tower carries 2 different models now.
a 38 incher...
http://www2.towerhobbies.com/cgi-bin...?&I=LXJWJ5&P=7
and a 27" FF that could probably be converted...
http://www2.towerhobbies.com/cgi-bin...?&I=LXHST2&P=7
10-02-2005 | 10:30 PM
#2
Senior Member
My Feedback: (11)
Joined: Aug 2004
Posts: 1,253
Likes: 0
Received 0 Likes
on
0 Posts
From: saint joseph,
MO
RE: Predator for AP ship?
The big one would probably fly a blip chip camera but I'd stay away from the small one. It's almost too small to carry much anything.
10-03-2005 | 12:26 AM
#3
Senior Member
Joined: Jul 2004
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
From: Fairfax,
VA
RE: Predator for AP ship?
I had the littlebirdz Predator. It was to brittle to even think about doing anything with. I'm still let down by that whole thing and have gone off to designing my own ships.
10-03-2005 | 04:58 AM
#4
Senior Member
My Feedback: (1)
Joined: Jul 2003
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
From: Yankalilla, AUSTRALIA
RE: Predator for AP ship?
Though I havent seen one , I'd say there'd be troublegetting it to ballance with the camera up front , you'd have to put the camera on the CG...........addinfernitum[
]
]
