Rookie servos 4 rudder ?
11-03-2005 | 11:33 AM
#1
Thread Starter
My Feedback: (22)
Joined: Nov 2001
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
From: Phoenix,
AZ
Rookie servos 4 rudder ?
Hey guys,
What servos are you using on the rookie for the rudder ?
I need to put servos in a rookie 2 and the instructions say 5kg of torque.
I don't konw what that equals in english measurments.
Barry Finck
Enola, PA
What servos are you using on the rookie for the rudder ?
I need to put servos in a rookie 2 and the instructions say 5kg of torque.
I don't konw what that equals in english measurments.
Barry Finck
Enola, PA
11-03-2005 | 12:52 PM
#2
My Feedback: (31)
RE: Rookie servos 4 rudder ?
On my Rookie 2, I've got JR servos all around except for one. See 9303 setup below:
Throttle, single channel, JetCat P-120 ECU
Elevator, 1 channel w/ Matchbox, JR8411 x2
Ailerons, 1 channel w/ Matchbox, JR8231 x2
Rudders, 1 channel y-connected, JR8231 x2
Gear, 1 channel, HiTec MG Servo x1
Canards, 1 channel, JR8611a x1
Air Brake, 1 channel, JR8611a x1
Thrust Vector, 1 channel, JR8411 x1
NW Steering, 1 channel, JR8411 x1
Brakes, MiniHobby Proportional Valve plugged into Elevator Matchbox
First Flight Scheduled for the 11th of Nov.
Throttle, single channel, JetCat P-120 ECU
Elevator, 1 channel w/ Matchbox, JR8411 x2
Ailerons, 1 channel w/ Matchbox, JR8231 x2
Rudders, 1 channel y-connected, JR8231 x2
Gear, 1 channel, HiTec MG Servo x1
Canards, 1 channel, JR8611a x1
Air Brake, 1 channel, JR8611a x1
Thrust Vector, 1 channel, JR8411 x1
NW Steering, 1 channel, JR8411 x1
Brakes, MiniHobby Proportional Valve plugged into Elevator Matchbox
First Flight Scheduled for the 11th of Nov.
