FUTABA S3001s and S3004s
09-18-2006 | 09:59 PM
#1
Thread Starter
Senior Member
Joined: Sep 2006
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
FUTABA S3001s and S3004s
Whats the difference? The only one I see is weight and price...
S3001 http://www.servocity.com/html/s3001_...l_bearing.html
S3004 http://www.servocity.com/html/s3004_...l_bearing.html
S3001 http://www.servocity.com/html/s3001_...l_bearing.html
S3004 http://www.servocity.com/html/s3004_...l_bearing.html
09-19-2006 | 12:13 AM
#2
Joined: Apr 2006
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
From: Scappoose, OR
RE: FUTABA S3001s and S3004s
I guess you have to find out what is meant by standard and precision bearings. More slop in
the standard, and no slop in the precision. Need to go to a Futaba servo catalog and see if
there is an explanation.
Good hunting.
the standard, and no slop in the precision. Need to go to a Futaba servo catalog and see if
there is an explanation.
Good hunting.
09-19-2006 | 02:34 PM
#3
Senior Member
Joined: Mar 2003
Posts: 6,544
Likes: 0
Received 0 Likes
on
0 Posts
From: Garland, TX
RE: FUTABA S3001s and S3004s
Here are a few old threads on this subject.
http://www.rcuniverse.com/forum/m_17...tm.htm#1771994
http://www.rcuniverse.com/forum/m_34.../tm.htm#343304
http://www.rcuniverse.com/forum/m_16...tm.htm#1691844
http://www.rcuniverse.com/forum/m_17...tm.htm#1771994
http://www.rcuniverse.com/forum/m_34.../tm.htm#343304
http://www.rcuniverse.com/forum/m_16...tm.htm#1691844
