R/C fan-addict

Okay there have been about 8 tries at creating an official emaxx thread, all of which failed and had badly spelled titles, but this one if different! This one will not only survive, but it will prosper! lol well yeah just post your emaxx stuff in here. I'll start with recent news for my emaxx:

I just bought some integy type 2 front and rear blue aluminum bulkheads. I also bought a robinson racing 72T steel spur gear with the dual slipper pads (finally got rid of the slipper pegs!!!!). I also bought from 1/8" aluminum sheet so that I can cut my own chassis, I'll post some pics of the buildup and final result. I also bought some 1/16" sheet to make skids with. I'll also post a list of upgrades I have in my emaxx:

Lunsford titanium hinge pins
Integy blue aluminum chassis brace
Integy blue aluminum front and rear bulkheads
RPM bulkhead braces
RPM blue front bumper
RPM black front and rear shock towers
RPM skid wear plates (full set)
Great planes s-600 motors (2)
Traxxas heatsink
Deans plugs all around
Team Orion 3000mah bash packs
RPM black a arm (only one of the front)
Robinson racing 72T steel spur gear w/ dual slipper pads
custom aluminum chassis
custom aluminum skids
Futaba 3PM radio
Proline Road rage tires
ESP wheelie bar
Steel screw kit

and that's it for now! lol I am working toward adding a BL system once I get a nitro buggy which I will convert to electric.

Post your emaxx stories and pics!

-Inverted-

Amen to that...

R/C fan-addict

lol someone remembered that! lol there were like five with "oficail emax tread" titles!

icecreamslick

My Feedback: (9)

[sm=lol.gif]

Lunchboxer

Did someone say mis-spell?! (joke)

Good luck with the thread!!

Bombers_410

lol the offical pede thread is spelled wrong, but its lasted 165 pages. I guess its not really the spelling, but more the truck that counts. Go Stampede WAHOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!! !!!!!!!!!!!!!!! jk.

I want an emaxx

R/C fan-addict

I uh... I meant to uh... spell own... it's totally... correct...

-Inverted-

LOL, five, More like TWENTY-FIVE

FE_Chris

My Feedback: (2)

Here's the maxx i'm working on!

So to end this debate too....How fast does a STOCK e-maxx do in 2nd gear?

R/C fan-addict

depending on batteries used, but on bash packs (12 cells) I would say not more than 29 mph with stock gearing in second gear. Why don't you install your titans and measure it with your GPS? BTW nice truck! I love the bumper (got it for my emaxx too!)

homeroFREAKINBRASILIAN

oh god..i want an e-maxx so bad..but all i have right now is 180 bucks to spend one one and im lookin on ebay and at the last minute BOOM.the price goes WAY UP!......but its all good.....

sc0rch

i'mreally interested in the custom chassis...i've been looking for good info and pics so me and my dad can make our own...but were not sure where to start..i believe i'm going to buy a spare chassis so that i dont have to tear my truck apart untill it's ready...do you have any reference your going off of or are you just winging it?


maybe if we successfully make our own i can get him to make a few of um and sell um pretty cheep

hunter306

Here is mine nearly completed. It also has the HV-Maxx 6.5 in it.

mtmad

well i hate to say it but I cuaght the Emaxx Virus and traded my on road car for it today and its being shipped and ill have it next week and already am planning its mods,but the ezilla i got last week made me crazy so now im still planning on another emaxx plus the one i bought. And i went and bought three new bodies for them.

homeroFREAKINBRASILIAN

im so jealous....

mattnin

I'll post a few pictures of my custom modified e-maxx. It uses a t-maxx chassis, revo steering knuckles and axle/drive shafts, locked axles, custom fabbed 4-link suspension, robinson racing diffs with lockers, 4 wheel steer, hv-maxx, 1/8 scale XTM truggy tires. I can't remember the rest, but without further ado, here it is.

mtmad

very nice rig hope i get mine looking that nice,but today theres two inches of ice out side and cant even get to hobby shop so been flying helli indoors today.

icecreamslick

My Feedback: (9)

.......................so you crawl with that truck? [sm=confused.gif]

R/C fan-addict

Well I'm not really going off any refernce stuff, but I've decided to buy a sheet of lexan and then cut that so that it fits nicely into the emaxx and then I will trace it onto the aluminum and then cut the aluminum sheet to size. Then I can put the aluminum in and adjust it around to make it fit nicely.

Eman77

I was digging the Savage more, but now I'm digging the E-Maxx a lot. Nice trucks in here. I gotta get me a MT after the holidays...

R/C fan-addict

well my R/C stuff arrived today! I got the 1/8" aluminum sheet which is so stiff that I can't bend it even if I push with all of my strength! I also got a I think 1/16" or maybe less thick sheet of aluminum to make skids with. I might use the extra 1/8" aluminum to make some shock towers though it would be a shame since I spent $30 on new RPM shock towers just like a month ago! I also got the RR steel spur gear and blue integy bulkheads. I also got a new 3PM radio with 2 servos so that'll be going in my emaxx! I think I will replace the stock shifting servo with the faster and stronger futaba S3003 servo. I will install everything tomorrow and I'll be sure to post pics of my new chassis upon completion!

mtmad

Well now i have three emaxx s and one ezilla,went to swap meet and got the third yesterday,all three are stock and ezilla is also will start buying mods for them after xmass but still considering buying a fourth e maxx before xmas.

R/C fan-addict

haha you're a dedicated emaxx fan I take it?

Well I finished cutting out and filling my chassis out of the 1/8" aluminum sheet. I already drew where to cut for the tranny and servos, but I haven't cut those holes yet. I also finished my rear skid out of 1/16" aluminum and am almost done with my front skid. I also installed the blue bulkheads and man do they look sweet! They match the blue chassis brace too, so that's a plus!

Elmo6s

My Feedback: (1)

Why have 4 E-maxxs? Hop up one or two and you'll be much happier! I have a super E-maxx, and its a blast. It doesn't break, and goes about 45mph. Why not sell the others and get an indestructable beast?

mtmad

Because im 50 and have 3 boys at home one for each and one as a hop up project,funner to run several together than one by youself