EME 35CC Gas Engine
#1
Thread Starter
My Feedback: (8)
Join Date: Mar 2015
Location: Dover Delaware
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
EME 35CC Gas Engine
his engine is new and has never been used, i bought this to use in my cessna but i realized a smaller engine of maybe 20cc power will be best to keep it scale as i do not want to cut out much on the cowl so i decided to sell this.
Includes: electronic ignition, muffler, spark plug, gasket, steel bolts, machined aluminum standoffs, throttle arm
Suggested Propellers: 18x10, 19x8, 19x10 & 20x8
Specifications:
Displacement: 35 cc
Weight: 2.52 lb (includes muffler and ignition)
RPM Range: 1,550-7,500
Output: 3.6 hp @ 7,100 rpmThrust: 9kgf @ 200M (19.8 lbs) ~ 8.1kgf @ 2000m (17.8 lbs)
Requires: unleaded gasoline 91-93 octane, oil 1:30 - 1:35, ignition battery ( 6V-12V) & propeller (18x10, 19x10, 20x8)
Technical Data:
Ignition Battery: 4.8-8.4V HV Ignition
Compression Ratio: 7.6:1
Gas/Oil Mix: 30:1
Replacement Spark Plug: CM6
Weight Breakdown: Engine: 33.86 oz (960 g); Muffler: 1.58 oz (45 g); Ignition: 4.9 oz (140g)Ignition: Rcexl - High Voltage (6-12V)
Tech Notes: - Same foot print and the DLE 30/35. - Same exhaust port size and bolt spacing as the DLE/SA 30/32/35. Most common
Includes: electronic ignition, muffler, spark plug, gasket, steel bolts, machined aluminum standoffs, throttle arm
Suggested Propellers: 18x10, 19x8, 19x10 & 20x8
Specifications:
Displacement: 35 cc
Weight: 2.52 lb (includes muffler and ignition)
RPM Range: 1,550-7,500
Output: 3.6 hp @ 7,100 rpmThrust: 9kgf @ 200M (19.8 lbs) ~ 8.1kgf @ 2000m (17.8 lbs)
Requires: unleaded gasoline 91-93 octane, oil 1:30 - 1:35, ignition battery ( 6V-12V) & propeller (18x10, 19x10, 20x8)
Technical Data:
Ignition Battery: 4.8-8.4V HV Ignition
Compression Ratio: 7.6:1
Gas/Oil Mix: 30:1
Replacement Spark Plug: CM6
Weight Breakdown: Engine: 33.86 oz (960 g); Muffler: 1.58 oz (45 g); Ignition: 4.9 oz (140g)Ignition: Rcexl - High Voltage (6-12V)
Tech Notes: - Same foot print and the DLE 30/35. - Same exhaust port size and bolt spacing as the DLE/SA 30/32/35. Most common
Last edited by Rileys; 08-05-2018 at 05:40 AM.
#2
My Feedback: (36)
Join Date: Mar 2005
Location: Raleigh, NC
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
William Earle
I will offer 220 asking price let me know or send me invoice to
William Earle
9701 Charlton Ct
Raleigh NC 27613. email. [email protected]
William Earle
9701 Charlton Ct
Raleigh NC 27613. email. [email protected]