Zinger 4 Blade Propeller 20x12
#1
Thread Starter
My Feedback: (50)
Join Date: Jul 2002
Location: Upper Darby,
PA
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Zinger 4 Blade Propeller 20x12
Zinger 20x12 4 blade Propeller
Center hole is 10mm and hub is sized to fit inside 4" diameter Zinger Spinner - Spinners and blades avaiable at: zingerpropeller.com
(replacement blades available.)
This is a flying prop for a 60 to 70cc engine and its still available from Zingerpropeller.com
Minimum spinner size is 4 inches and would work well on a 1/4 scale p-51.
Any other questions, please ask.
Center hole is 10mm and hub is sized to fit inside 4" diameter Zinger Spinner - Spinners and blades avaiable at: zingerpropeller.com
(replacement blades available.)
This is a flying prop for a 60 to 70cc engine and its still available from Zingerpropeller.com
Minimum spinner size is 4 inches and would work well on a 1/4 scale p-51.
Any other questions, please ask.