Jet Central Turboprop
11-25-2021, 11:21 AM
#1
Thread Starter
Join Date: Oct 2007
Location: Tampa, FL
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Jet Central Turboprop
198 minutes of run time
Comes with ECU, pump, solenoids, Exhuast stacks, fuel filter, digitech 100cc UAT, (2) data terminals, fod screen
Specs below...
Prop Recomended Size
25 to 27 2 Blades
23 to 25 3 Blades
Specifications
Turbine RPM Range: 55,000 - 180,000
Weight: 2,300 kg (5.07 lbs) with starter
Diameter: 86 mm (3.385 in)
Length: 430 mm (16.2 in) with starter
Exhaust Gas Temperature: 500º C - 700º C
Fuel Consumption: 0.18 lt/min (6 oz/min) Average
Prop RPM range: 6,000 - 8,000
Prop Recomended Size: 27 in 2 Blades, 24 in 3 Blades
Power: 7 kilowatt
Comes with ECU, pump, solenoids, Exhuast stacks, fuel filter, digitech 100cc UAT, (2) data terminals, fod screen
Specs below...
Prop Recomended Size
25 to 27 2 Blades
23 to 25 3 Blades
Specifications
Turbine RPM Range: 55,000 - 180,000
Weight: 2,300 kg (5.07 lbs) with starter
Diameter: 86 mm (3.385 in)
Length: 430 mm (16.2 in) with starter
Exhaust Gas Temperature: 500º C - 700º C
Fuel Consumption: 0.18 lt/min (6 oz/min) Average
Prop RPM range: 6,000 - 8,000
Prop Recomended Size: 27 in 2 Blades, 24 in 3 Blades
Power: 7 kilowatt
Last edited by michaelpk3; 11-25-2021 at 04:19 PM.
