1/15th Bandai Stug IV parts w/ metal tracks to make Jagdpanzer IV
#1
Thread Starter
1/15th Bandai Stug IV parts w/ metal tracks to make Jagdpanzer IV
This is a project I started, to convert a Bandai Stug IV to a Jagdpanzer IV. You get most of the various parts needed to convert (as shown in pictures), but you have to fabricate the rest of the Jagdpanzer upper hull....primarily from sheet styrene. You also get a set of drawings, sketches and plans to work with (25+ sheets). Kenny Kong metal tracks are included which have already been painted and weathered, and the model has hinged metal mud flaps on the front lower hull. Metal gearboxes are already installed, and I have included a Jagdpanzer cast resin mantlet (2 parts) along with a metal barrel that you will need to cut to length depending on which version of the Jagdpanzer IV (A or V) you choose to make. You will need to supply your own electronics, battery, speaker and radio/receiver "if" you want to build an RC tank model.. This project is well along and you can be the modeler that finishes it. Buyer pays shipping in addition to purchase price.