Ziroli P-47 razor back blown up to 110" with Moki 250.
#1
Thread Starter
My Feedback: (43)
Ziroli P-47 razor back blown up to 110" with Moki 250.
Ziroli P-47 thunderbolt razor back plans blown up to 110".
Features:
aluminum tape covered
Moki 250 engine: one of the newer ones with the blue ignition system versus the 'top hat'.
CARF 4 blade adjustable prop.
Sierra's gear with scale shrink bar and wheels.
Functioning cowl flaps.
Functioning canopy.
complete detailed cockpit from D-balsa.
Best made pilot which are very expensive.
Functioning main and tail doors.
Nav/landing lights.
Asking $7,000.
With engine at 4 grand, prop at $650 plus 3 spare blades ($300), gear around $2000 (including wheels), cockpit around $200, pilot around $200 (best pilot) and not counting all the expensive servos and all the materials and work, that price is less than just the material in the plane and it would cost about $13,000 to get the CARF P-47 into the air with same equipment.
Build thread:
http://www.rcuniverse.com/forum/rc-w...-up-110-a.html
Looks like this web site doesn't like to translate web addresses so do a search on :
Email me for additional pictures.
pick up only.
Will be at the Goshen, Indiana warbird flyin.
Do not contact me via private messages on this web site since I rarely check it.
Send all inquiries to my email.
email: [email protected]
Will reply to emails after I get back from St. Charles, Ill flyin June 23)
Features:
aluminum tape covered
Moki 250 engine: one of the newer ones with the blue ignition system versus the 'top hat'.
CARF 4 blade adjustable prop.
Sierra's gear with scale shrink bar and wheels.
Functioning cowl flaps.
Functioning canopy.
complete detailed cockpit from D-balsa.
Best made pilot which are very expensive.
Functioning main and tail doors.
Nav/landing lights.
Asking $7,000.
With engine at 4 grand, prop at $650 plus 3 spare blades ($300), gear around $2000 (including wheels), cockpit around $200, pilot around $200 (best pilot) and not counting all the expensive servos and all the materials and work, that price is less than just the material in the plane and it would cost about $13,000 to get the CARF P-47 into the air with same equipment.
Build thread:
http://www.rcuniverse.com/forum/rc-w...-up-110-a.html
Looks like this web site doesn't like to translate web addresses so do a search on :
Ziroli p-47 92" blown up to 110"
Build thread has videos of flights.Email me for additional pictures.
pick up only.
Will be at the Goshen, Indiana warbird flyin.
Do not contact me via private messages on this web site since I rarely check it.
Send all inquiries to my email.
email: [email protected]
Will reply to emails after I get back from St. Charles, Ill flyin June 23)
Last edited by samparfitt; 06-18-2019 at 12:21 PM.
#3
Thread Starter
My Feedback: (43)
take off:
flyby:
landing:
https://www.youtube.com/watch?v=YFoYkFPhYxQ
take off:
https://www.youtube.com/watch?v=8Bgpg4xnE20
low pass:
4 point roll:
landing:
https://www.youtube.com/watch?v=bNfeyqWyrBw
flyby:
landing:
https://www.youtube.com/watch?v=YFoYkFPhYxQ
take off:
https://www.youtube.com/watch?v=8Bgpg4xnE20
low pass:
4 point roll:
landing:
https://www.youtube.com/watch?v=bNfeyqWyrBw