patniven

My Feedback: (36)

For sale is a Kingtech K-45G2 turbine engine with 212 minutes / 25 cycles total time since new. This engine has been run on pump diesel and 5% Kingtech oil since new and has ALWAYS performed reliably - no failed starts, no flameouts. A FOD screen and battery are included in the sale.
This is the last of the 45 Newton Kingtechs that will run reliably on diesel. The manufacturer only recommends Jet-A or Kerosene for the newer K-45G3M.

Shipping is FREE in CONUS.

K-45G2 Specifications:

Diameter: 76mm (2.99")
Length: 195mm (7.68")
Weight: 700g (1 lb. 8.6 oz.)
Max. RPM: 170000
Thrust: 4.5 kg @ 15° C (9.9 lb. @ 15° c)
EGT: 700°C max
Fuel consumption: 155 g / min (5.46 oz / min)
Fuel: Diesel, Jet A1, Kerosene
Lubrication: 5%
Maintenance cycle: 25 hours

PM, call, text, or email:
Pat Niven
PayPal & email: [email protected]
850-206-7407

RAPPTOR

My Feedback: (41)

Trades..
what you interested in.?

patniven

My Feedback: (36)

Currently looking for a JetCat 180RX, 180RXi or 180NX. Also posted a wanted ad for a JHH A-7 Corsair ARF. Hard to find, but they're out there...