Phoenix Models p-47 (electric retracts)
12-19-2021, 01:36 PM
#1
Thread Starter
My Feedback: (1)
Join Date: Mar 2003
Location: Richmond, KY
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Phoenix Models p-47 (electric retracts)
purchased from Tower Hobbies nib . I took it out of box to inspect for damage all is good re-packed and ready for assembly ,does include electric retracts not pneumatic.
Product Details
Key Features
Experience Level: Intermediate
Plane Type: Scale military
Construction: Balsa and light plywood
Wing: Bolt-on two-piece
Flaps: Slotted to provide function and scale appearance concealing the control horns internally to maintain scale lines
Covering: Hangar 9 UltraCote
Landing Gear: Heavy duty air retract with CNC machined metal suspension struts, air valve system, air hose, one-way valve
Cowl: Factory painted
Canopy: Removable for access to battery and radio equipment
Cockpit: Detailed with instrument panel, painted pilot bust
Top Hatch: Removable for easy battery changes and access to radio gear
Motor Mount: Plywood
In The Box
P-47 Thunderbolt 30-35cc Gas EP ARF
Prebuilt and covered Fuselage
Wing and Tail sections
Landing Gear
Hardware Package
Instrument Panel
Pilot
Lens
Mirror
Gun and Removable Antenna
Product Manual
Needed to Complete
Radio: 8-channel minimum
Servos: 9 standard size (2 aileron; 2 flap; 2 elevator; 1 rudder; 1-air valve, 1-throttle (if using gas engine)
Receiver Battery: 6.0V 2400-2600mAh NiMH
Spinner: Scale type P47 Thunderbolt
Building and field equipment
For Electric Power; Brushless Motor: Outrunner type, Great Planes ElectriFly RimFire 1.60 recommended Electronic Speed Control: LiPo Battery: 12S 5000 - 6000mAh Propeller: 16x8 - 18x8E
For Glow or Gasoline Power; Engine: 30-35cc gasoline Propeller: To match selected engine
Product Details
Key Features
Experience Level: Intermediate
Plane Type: Scale military
Construction: Balsa and light plywood
Wing: Bolt-on two-piece
Flaps: Slotted to provide function and scale appearance concealing the control horns internally to maintain scale lines
Covering: Hangar 9 UltraCote
Landing Gear: Heavy duty air retract with CNC machined metal suspension struts, air valve system, air hose, one-way valve
Cowl: Factory painted
Canopy: Removable for access to battery and radio equipment
Cockpit: Detailed with instrument panel, painted pilot bust
Top Hatch: Removable for easy battery changes and access to radio gear
Motor Mount: Plywood
In The Box
P-47 Thunderbolt 30-35cc Gas EP ARF
Prebuilt and covered Fuselage
Wing and Tail sections
Landing Gear
Hardware Package
Instrument Panel
Pilot
Lens
Mirror
Gun and Removable Antenna
Product Manual
Needed to Complete
Radio: 8-channel minimum
Servos: 9 standard size (2 aileron; 2 flap; 2 elevator; 1 rudder; 1-air valve, 1-throttle (if using gas engine)
Receiver Battery: 6.0V 2400-2600mAh NiMH
Spinner: Scale type P47 Thunderbolt
Building and field equipment
For Electric Power; Brushless Motor: Outrunner type, Great Planes ElectriFly RimFire 1.60 recommended Electronic Speed Control: LiPo Battery: 12S 5000 - 6000mAh Propeller: 16x8 - 18x8E
For Glow or Gasoline Power; Engine: 30-35cc gasoline Propeller: To match selected engine
Last edited by wantitbad; 12-19-2021 at 01:47 PM.
