Go Back  RCU Forums > Radios, Batteries, Clubhouse and more > Batteries & Chargers > MaxAmps Support
Reload this Page >

4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

Notices
MaxAmps Support Receive support for your MaxAmps products here!

4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

Old 05-03-2007, 01:15 PM
  #1  
impensb
Junior Member
Thread Starter
 
Join Date: Apr 2007
Location: Moline, IL
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

Guys, I'm hoping you can tell me what I am doing wrong here.

I can't get the MaxAmps 4.4K Top Qualifier 4400mah 6 Cell Sport Pack to fit into my e-maxx. If I try to push the batteries down into the tray and attach the hold downs, the wires sheer off at the base.

What am I doing wrong?
Old 05-03-2007, 02:39 PM
  #2  
guver
Senior Member
My Feedback: (325)
 
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

Nothing really , the e-maxx has small batt trays designed before the larger cells. Maybe you could trim the end cap plastic and fudge the wires to exit coming straight up instead of out. Possibly the battery tray(chassis) can be cut away too?
Old 05-03-2007, 09:21 PM
  #3  
JAM MaxAmps
Senior Member
 
JAM MaxAmps's Avatar
 
Join Date: Jan 2007
Location: Nine Mile Falls, WA
Posts: 556
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

There's a reason it's not listed in the "usage list" in the Info section for the pack.
Old 05-06-2007, 10:32 AM
  #4  
blownzuki
Junior Member
 
Join Date: Oct 2005
Location: Rochester, IN
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

they don't fit in a rustler either. Also, why can't i get them to show 4400 MaH on my charger, (ice) and all my other batteries charge just fine? They show 3600 MaH when fully charged.
Old 05-13-2007, 08:40 AM
  #5  
benjiman74
Junior Member
 
Join Date: Oct 2006
Location: Melbourne, AUSTRALIA
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

My maxamps 4400 only charges to 3800 while my Intellect 4200 takes 4200 +/- 50mah. []
Old 05-13-2007, 08:44 AM
  #6  
guver
Senior Member
My Feedback: (325)
 
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

If the batt is full and empty then the perhaps capacity is 3600-3800.

Sounds like my 3800's and 4200's, they are identical capacity. I call them all 3800 for all practical purpose.
Old 05-21-2007, 09:57 PM
  #7  
impensb
Junior Member
Thread Starter
 
Join Date: Apr 2007
Location: Moline, IL
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX


ORIGINAL: JAM JAM

There's a reason it's not listed in the "usage list" in the Info section for the pack.
I guess I did not see that before I ordered these. I've got a pair of 4000 Top Qualifiers also, and have had almost a year. I'm looking at the E-Maxx battery section now on maxamps.com. Is there anything availible for an e-maxx that is under $90 and not lithium that will fit ok without modification. Those 7 cell packs look good, but do they fit ok?

Also can you suggest any workarounds to help me get the batteries to lay flat in the tray? As it is now I'm zip tying them in on their side.

Thanks for any help.
Old 05-21-2007, 10:07 PM
  #8  
impensb
Junior Member
Thread Starter
 
Join Date: Apr 2007
Location: Moline, IL
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX


ORIGINAL: guver

Nothing really , the e-maxx has small batt trays designed before the larger cells. Maybe you could trim the end cap plastic and fudge the wires to exit coming straight up instead of out. Possibly the battery tray(chassis) can be cut away too?
Thanks for the help and letting me know I'm not crazy. [8D] I've replaced the end caps with some that allow the wires to come straight up instead of straight out. However, that still puts a lot of stress on the wires and some end up sheering off anyways. This is what i tried. http://www2.towerhobbies.com/cgi-bin...3&I=LXJZ85&P=K it works ok, but these caps are just a hair too small.

I've thought about modifiying the body tray, but the posts that hold the battery hold downs are directly in the way of the center of the wires on the battery, so I don't think there is much I can do there.

Do you have any other suggestions?

Thanks.
Old 05-22-2007, 03:24 PM
  #9  
guver
Senior Member
My Feedback: (325)
 
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes on 0 Posts
Default RE: 4.4K Top Qualifier 4400mah 6 Cell Sport Pack Doesn't fit in my E-MAXX

Maybe removing the end cap and straddling the hold-down post?

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.