Correct MVVS for Cap X
 

Dar:

Looking for a good gas match for new Cap X, is 73" span, 13-15 lb, intended for 3-D. Currently have one with ZDZ 40, power is very good here. Want to avoid the install hastle, the MVVS appears a good direction. Do you have a suggested engine for this combo, do love power!

RE: Correct MVVS for Cap X
 

Roger,


The MVVS 35 cc engine would give this model 'scale' power.

However, for 3-D and since your other such plane has the ZDZ 40 cc, I would suggest the MVVS 45 MG for it.
It is very light and will out-power your other model by a very significant margin.

The MVVS 45 cc has a very low level of vibration.

You can go to the [link=http://www.mvvs.cz/]MVVS web site[/link].
Select 'Galerie' on the left then select 'Videogalerie' at the top.

The top clip visualizes this engine running.